Pete Phillips

There's an article about the after-market Buick convertibles of the 1970s and 1980s in the works by George Toth. Will be in the Feb. or the March issue. Pete

Not mine. Body and trim look great; interior is a disaster, but only $500 for the whole car. https://www.facebook.com/marketplace/item/675583701443994/?ref=browse_tab&referral_code=marketplace_top_picks&referral_story_type=top_picks

Insulated, formed and pre-cut for the foot pedals. Front floor mat for Pontiacs, 1949-1952. Should be warmed up in the sun or with a heat gun before unrolling, since it has been rolled up in this box for 70 years. Still fairly supple, but needs to be unrolled carefully. $100 plus postage from Texas 75418.

Turbo wheel now turns. We took it apart, lubricated it and freed it up.

Driver quality, set of 4, $50 plus postage from zip code 75418. For 1964 Skylark. They have some dings and some pits on the die-cast spinners. Postage is probably going to be around $35-$45 in the USA, depending on how far you are from Texas. Pete Phillips, BCA #7338

I have an oil pan. Pete Phillips Bonham, TX>

This is for the 215 aluminum V8 in the Olds Cutlass Jetfire for 1962 and 1963 only. The turbo wheel does turn--not frozen up like so many of these. https://www.ebay.com/itm/276250623655

Hard to find, this is the 4-barrel intake manifold for the 1961-1963 Buick 215 aluminum V8. https://www.ebay.com/itm/276249057869

https://www.ebay.com/itm/276248760695 Mine. For sale. Hard to find

$50 plus postage. Pete Phillips, BCA #7338

Lower front bumper for 1963-1964 Riviera. Good for a driver; would need replating and one very small dent straightened for a show winner. No rust-through, from a very solid Oklahoma car. $95 plus postage from Bonham, Texas 75418 Pete Phillips, BCA #7338

I think these are 1964 and 1965 steering wheel horn bars for Rivieras. Good condition. $30 each plus postage. Pete Phillips BCA #7338 Leonard, TX

Have big series ones as well.

I have a 1966 401/425 intake manifold and Rochester Quadra-Jet carburetor for sale. This is a one-year-only manifold for the 1966 Riviera and also the 1966 GS-400. Carburetor looks clean and rebuilt, but probably several years ago. Been sitting on the shelf for awhile. Would like $250 for the manifold and $300 for the carburetor, or $500 for both together, plus postage. I could also deliver it to the Buick Club's National Meet in Ohio in July if paid for in advance. Pete Phillips, BCA #7338 Leonard TX.

These were given to me, but I cannot identify if they are for a 2-door, 4-door, or rear quarter window. Says "1939 Buick" on them, but look how short the movement is (gear teeth). Can anybody help I.D. these?

Take a look at the engine photo for this one on Ebay. What is the contraption that's mounted about where the generator goes? Is that some sort of early power brake booster? Hoses to it almost look like power steering hoses. Early after-market power steering???

I also have them for a 4-dr. hardtop or sedan, 1957-58, same price.

$250 plus postage which is usually around $28, for pair of door sill plates for 1957-1958 Century and Special 2-dr. hardtop, convertible, or 2-dr. sedan. Available now, no waiting. Also fits 1957-58 Olds 88 2-dr. models.

Left-hand tail lamp assembly for 1955 Special or Century series. There's a crack in the back-up light lens and a handful of chrome pits here and there if you look really hard, but this is nicer than most. Suitable for all but the finest show cars. Asking $250 plus postage. Will listen to all offers.

That's a lot of car for only $5500. Says there is hail damage but doesn't appear to be too bad. Not mine, in Austin, Texas so probably no rust, either. https://www.facebook.com/marketplace/item/393081283150703/?ref=browse_tab&referral_code=marketplace_top_picks&referral_story_type=top_picks

I found several of these in a box with 1950s weatherstrip. They are stamped "General Tire" on the back and are quite heavy. Each probably weighs 2 pounds easily. 33 inches long, with attaching holes on the back, but of different diameter holes and seem to be randomly placed holes, with a couple of them raised slightly. Fuzzy window channel weatherstrip on the inside with chrome beads. It reminds me of something Studebaker might have done in the 1950s but I really have no idea what these are or what they fit. Anyone?

Not mine, but I know the seller and he is a good guy; lives southeast of Dallas, Texas and has a good collection of 1961-1963 Skylark and Special parts plus parts cars. $3800 or fair offer for everything. It's been several years since I toured his place. He's elderly and hard of hearing but a very genuine collector and enthusiast for compact Buicks. https://www.facebook.com/marketplace/item/311651715096678/?ref=browse_tab&referral_code=marketplace_general&referral_story_type=general&tracking={"qid"%3A"-2913884344483067561"%2C"mf_story_key"%3A"1944926312966174656"%2C"commerce_rank_obj"%3A"{\"target_id\"%3A1944926312966174656%2C\"target_type\"%3A6%2C\"primary_position\"%3A2%2C\"ranking_signature\"%3A7249359210508221662%2C\"commerce_channel\"%3A501%2C\"value\"%3A0.00024202717418437%2C\"upsell_type\"%3A103%2C\"candidate_retrieval_source_map\"%3A{\"24449623757962399\"%3A701%2C\"7067264343339589\"%3A3001%2C\"6536911419711687\"%3A3501%2C\"7023405747718768\"%3A701%2C\"6347913565268353\"%3A3501%2C\"7167824313269416\"%3A3001}%2C\"grouping_info\"%3Anull}"%2C"lightning_feed_qid"%3A"-2913906609562243677"%2C"lightning_feed_ranking_signature"%3A"7249359210508221662"%2C"ftmd_400706"%3A"111112l"}

Is this ambulance in New Jersey? There's been one for sale in New Jersey for awhile, but I thought it had green fenders. Pete Phillips

Not mine and too far for me to go look at it for you, but nicely equipped '64 Electra that looks like it has not been molested. Factory A/C, 425 V8 with dual carbs, bucket seats and "ironing board" console, for $11,000. Spring, Texas is north of Houston, down near Gulf coast. https://www.facebook.com/marketplace/item/6070390239736357/?ref=browse_tab&referral_code=marketplace_top_picks&referral_story_type=top_picks

9" diameter glass lenses for 1927 Master series Buick and 1928 Standard series Buick, by Guide Motor Lamp Mfg. Co. I forgot what I paid for them at Hershey. When I got home they didn't fit the '23 Buick I was working on. Are they worth $40/pair plus postage? Pete Phillips, BCA #7338