sagebrush

Hello Ed, I installed a mannual trans in a Dynaflush '56 Special in 1985. I took the transmission down to a local machine shop so he could measure the input shaft. I provided him with the I.D. of the end of the Dynaflush crank. He made me a bushing for about $40. I "tapped" it in and put it toghether(my first trans. swap job). I put around 75000 on the bushing with no problems. Hope this helps, Glenn

Hello, I have one from a 1954 if it will help you, Thanks, Glenn sellingmerchandise@yahoo.com

I will take your car. Please email me your phone number so I can call you and work out the details. thanks, Glenn

Hello Bill, Sorry I did not respond sooner. I don't always get to the site. You can call me at 765-294-4799 and I can give you my address or we can do a c.card order over the phone. thank you in advance, Glenn

Hello, I have a clean rust free hood from a 1964 Buick Lesabre. Hollander shows the Wildcat and the Lesabre as the same hood. Email me if you still need one. sellingmerchandise@direcway.com Thanks, Glenn

Hello, I have these for both the convertible and coupes. Email me if you still need them. sellingmerchandise@direcway.com Thanks, Glenn

Hello, I have the thermostat housings. No cracks or breaks. $50 to the lower 48 states and I will pay shipping. Let me know if you can use it. Call me at 765-294-4799 thanks, Glenn

I have a crack free left side single exhaust type. $175 plus $15 shipping to the lower 48 states. thanks, Glenn

Hello, I have dome lite covers for $35ea and wheel lip moldings for a 69 NONE GS Skylark. The wheel lips are clean but do need polished. $45ea. Shipping to the lower 48 states would run $15 UPS. Call 765-294-4799 or Email at sellingmerchandise@direcway.com Thanks, Glenn

Hello, I have the springs from a '56. They should be the same from '54-'56. I don't know this for sure so if yours is not a '56 then you may want to check. $45each plus $12 shipping to the lower 48 states. thanks, Glenn

Hello, I have a '56 Radio that looks good. I have no idea if it works. I will sell it for $45 as a good core plus $12 shipping. thanks, Glenn

Hello Rich, I have sold the front fenders. I am making a trip out west in Sept. for a buying trip. I can pick you up a pair of rust free ones on that trip. They run $300ea for really nice ones. I would require 1/2 down and the balance when you picked them up or had me ship them off to you. Thank you, Glenn

I have these swithces in good working order. Thanks, sellingmerchandise@direcway.com Glenn

Hello, I have these items from a 98 four door sedan. The linkage for both the carb and trans is $95 plus $15 shipping to the lower 48 states. Let me know if you can use them. Thanks, Glenn sellingmerchandise@direcway.com

Hello Gloria, I have these axile shafts. They are $75ea plus $15 shipping to the lower 48 states. Thank you, Glenn Email is sellingmerchandise@direcway.com