Jump to content


  • Posts

  • Joined

  • Last visited

About bjr

  • Birthday 01/27/1950

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

bjr's Achievements

1,000+ Points

1,000+ Points (3/7)

  • Collaborator

Recent Badges



  1. I think it's a ridge reamer, used to ream the ridge that forms at the top of a cylinder from wear. Once the ridge is reamed, or removed, the piston can be removed.
  2. I have a NORS 6 volt ignition coil made by "P&D Ignition Parts". The number on the box is LC_20. I believe it fits 1935_1942 Chev. Can anyone look this up and tell me all the different applications for this coil? Thanks Brian
  3. I used 3/4" copper rigid tubing when I did mine. Slope all lines to drain legs. Angle fittings up where they come off the main line, so the water flows by to the drain legs. The copper thieves would have to get into the shop first to steal the copper. Lots of better stuff to steal in my shop then the copper though.
  4. My guess is a 70's station wagon rear glass that goes up and down in the tailgate.
  5. Now that's funny, I don't care who you are.
  6. Sorry can't help in finding one. I sold my F222 about 15 years ago, don't have much Hupp stuff left anymore.
  7. 2nd on the 41 Buick by the look of the trim shadow on the skirt.
  8. If the dip tube was attached to the dipstick at a little above the add mark, when it was low on oil the glass would not fill with oil, so you would know it was time to add oil.
  9. I saw one of these as a kid. A friends mother had one on a 1950 Buick. If I remember correctly you would press in the button and the sight glass would fill with oil. Maybe vacuum connects to the top and a line goes down the engine dipstick tube to one side, and a line to the transmission dipstick tube (Dynaflow) to the other?
  10. That was the first year for freewheeling on the back end of the transmission.
  11. My 54 Special was behind the back seat on the drivers side.
  12. Where are the stamped frame numbers on a 1949 Super Sedanette? Are they stamped in more then one place? Do they match the numbers stamped on the aluminum plate which is riveted to the drivers side door post? I am trying to title a car with no title and need 2 sets of numbers for the DMV.
  13. Mount and speed knob for a Trico vacuum fan.
  • Create New...