Jump to content

RickBrinker

Members
  • Posts

    580
  • Joined

  • Last visited

Everything posted by RickBrinker

  1. On my 38 I had them chrome plated and they work just fine
  2. Looking for a 29 DeSoto Radiator surround for my Coupe,Does anyone know what else will fit ?
  3. 37 & 38 would be good to reproduce nobody has them and you would cover 2 years
  4. Go to a Napa parts Store with your bulbs they should be able to get them,that's where i get mine.You'll probably have to buy them by the box
  5. The Owners Manual says use straight 30 Wt
  6. I received this Email Here is a picture of the car. It is a 1921 Dodge Brothers Sedan, original and complete. My father used to wind it up and start it a couple of times a year, but he has been gone for 20 years. It has been stored in my mother's garage for 45 years, and has not seen the weather. We need to sell it to help with living expenses for my mother. What is a fair price? I would like to list this right away. It is located in Ponca City, Oklahoma. My cell # is 405-714-8899. I would appreciate your help. Thanks.
  7. Try Vintage Power Wagons-- Your Source for Dodge Power Wagon Parts and Trucks! -- civilian military m 37, m-37 wc Dodge Power Wagon
  8. Easy way to tell 29 didn't have a mechanical fuel pump.This one doesn't
  9. That is for low beam on the headlights
  10. Use straight 10 wt non detergent motor oil,for the torque converter there is a cover on the passenger side of the hump almost under the dash open the cover and turn engine over until you see a pipe plug remove the plug and fill until the oil starts to run out.The Trans fills from under the car fill until oil come out of the top fill hole.
  11. Try this place S.U.R.&R. is a leading manufacturer of an extensive line of replacement parts used in the Automotive Aftermarket industry. they can repair yours or make one for you I have used them and had good results.They are 2 mi from my house.
  12. This is what the website says Bob bobzetnick active 5 weeks 1 day Last log on 3 weeks 6 days ago
  13. I had some front spring made for my 29 at my local spring shop without any problems,and they were inexpensive.
  14. Look at the bottom of the page where it says email the Webmaster
  15. Yes,you can logon the Site without being a Member, you will not be able to access the members only section.
  16. The site is up and running you will be able to Browse for now until I get an updated Club Members List.There may be some loose ends that still need to be worked out.this is so you can see whats coming soon.
  17. Try Myers he just bought several trailers full of parts
  18. The new Website will be up by the end of the week.With a Link to the AACA message board.You will have to log on with your name not a nickname.the reason,we will have a DB Club members only section if you choose to use it.The Club Store will be available to members only, in the near future
×
×
  • Create New...