RickBrinker

IF YOU ARE A CAR BUFF THIS IS EXTRAORDINARY... YOU WILL SPEND HOURS GOING OVER THIS. NO MATTER WHAT BRAND OF CAR YOU ENJOYED, IT'S REFERENCED IN THIS LINE UP. HAVE FUN, KEEP SMILING! (Enjoy, click on the video camera to the right next to each item to view.) http://www.tvraaca.org/oldmovies.htm#movie

I didn't drag the Chicken it was in the the trunk !!!!! I ordered the Burma Shave dvd

I'll be bringing my 25

Took the 25 out for a drive on Sat.it was nice to have the wheel stay in place

That's what I've heard.See you next month

Finally took my head out my a$$ understood what you were saying,unscrewed the knob and out it came,THANK YOU !!!!!!!

Just tried that seems like the pin is to long to come out of the hole ???

Any ideas yet

maybe but can't put a new spring in it the way it is

This pin

Same make

Has anyone removed the locking pin on a Fat man wheel,mine wants to slide when I'm making a turn

I have used sealed bearings instead of the seals i took the inner side of the sealed bearing off so it would get lubed and the outer seal kept it from leaking

A locksmith should be able to change the switch to fit your key

USE 10wt NON DETERGENT Only !!!!!!!!!!!

30wt NON DETERGENT

What would cause my 25 to backfire a little when I'm slowing down,it runs fine otherwise

14.50 for both gaskets http://www.myersearlydodge.com/

Looks like this might work,at least the ribbon. http://www.bowtiebits.com/store/store_product_detail.cfm?Product_ID=97&Category_ID=1&Sub_Category_ID=4

Its not for sale they want to restore it.

Thanks

For 71 the Charger would have had a 50.60.or 78 Amp alternator the 78 Amp would have been for a car having air.You old Regulator will handle any of them

Replaced the rear packing with the new seal (took the easy side) as an experiment,ran the car for 15 min and so far dry as a popcorn fart.The big test will be in a week when we get together with the Main Region from Michigan for our Mini Meet.Thanks for your help. Will let you know how it does.

Did 1 press into each side ?