danceswithpumps

Members
  • Content Count

    522
  • Joined

  • Last visited

Everything posted by danceswithpumps

  1. I joined and spend a lot of time there. Fred does a GREAT job with it and again, you don't have to own one to enjoy it just need to like the old double A trucks. Thanks for all you do, Fred. Rod
  2. I have listed 2 Ford AA 1928 hub caps for spoke wheel on ebay for a 7 day auction. Item # 291124475359 291124438467 Thanks, Rod
  3. I have listed 2 Ford AA hub caps on ebay for a 7 day auction. Item # 291124475359 291124438467 Thanks, Rod
  4. I will sell separate: 3 drums with left hand threads $35 each 3 wheels with rings $40 each, lug nuts $5 each 1 set right and 3 left hand thread. plus shipping All items are shipped actual cost UPS or USPS. Trades and offers considered. Please PM me if you have questions or want more info/pics. 308-631-3497 cell Thanks, Rod_
  5. Thanks for the input on the rims. I did hit the rust spots with a claw hammer cleaning them up quite a bit. Yes, very nice pic, Dave! Rod
  6. The hub caps aren't that big. I'd guess them to be around 3 inches. I don't have them here with me. I may put them on Ebay.
  7. Here is the wheel with brake drum and lug nuts. Would like value complete or w/o drum and nuts. Thank you, Rod
  8. I have 3 of these AA spoked wheels and want to sell at least one. Seems like there are 2 different styles for the AA years. I will post pics tomorrow. Surface rust, pitted inside, includes snap in nickel hub cap. Thank you for your help. Rod
  9. The Ford Model AA wheel is sold pending payment. Thank you, Roger! Rod
  10. It's been so cold here in western Nebraska that the cats have found a new use for the heated dog bowl. Stay warm everyone, 6 more weeks of winter...HURRY SPRING!!
  11. Photo Bucket works for me....I think, Keiser. Thanks,:cool: Rod
  12. Heat works wonders. If that doesn't work, a last resort: could you grind cut or grind the had of bolt of and drive it out with a hammer and punch?... Is there room to swing the hammer and room for the bolt to be driven out? Good Luck! Rod
  13. I've used this tool when my Dad and I replaced worn out universal joints on center pivot gear boxes. I think Dad got his at NAPA. They were always almost up against a gear box. Because they ran in wet condititions, they were on that shaft for several years and really rusted on. These were made out of good metal. We would get them started wedging it in between the two and hit the end of the tool with a hammer driving it in. Wahlah...it's off! Good luck Rod van Pelt
  14. Would you have a 1930 DA Dodge Brothers radiator cap as pictured in the link below? http://search.yahoo.com/search;_ylt=A0SO8ywjfXJSmTsA6bpXNyoA?ei=UTF-8&fr=moz35&p=1929+dodge+radiator+cap&rs=3&fr2=rs-bottom It's the one with the two small wings. Thanks, Rod
  15. Here's an old snapshot of me and my first car, a 1930 Dodge Brothers DA Deluxe Coupe. My dad bought this car from a neighbor in 1951 to check cows, windmills etc. He loaned it to my uncle in 1960. When my uncle wanted to buy it, cut out the rumble seat and make it into a pickup, I talked Dad into getting it back in 62 with the idea of my fixing it up and driving it to school. We got it back and running. My Dad talked me out of driving it to school and I'm glad he did. This was my first car and I still have it. It has been shedded since 62 but not fully restored. I'm still working at it.....someday. Thanks, Rod
  16. Sorry to hear about your grandfather. Very nice looking car! :cool:Sure glad you are keeping the car which, I'm sure, was his pride and joy. Like to see more pics to be sure, but sure looks like a model DA sedan to me. There should be a plate on floor board on passenger side with DA###### which would be the serial number. A motor number will help too. More pics of dashboard, radiator emblem, wheels, motor, dash, etc. Thanks for your post. Rod For an example. Here is the emblem on my 1930 DA Coupe and front of car.
  17. Here are some pics I got from the new owner after paint and upholstering. Nice to know it wasn't rodded. Thanks, Rod
  18. Check these out on ebay. Not mine. http://www.ebay.com/itm/VTG-Beehive-Mopar-Tail-Lights-Dodge-Brothers-Chrysler-Plymouth-Desoto-1928-1929-/400590357936?pt=Vintage_Car_Truck_Parts_Accessories&hash=item5d450bc5b0&vxp=mtr Good luck! Rod van Pelt
  19. Wyobob, Nice score! Glad to see you're making some progress with your truck. I was looking at your pic of the spoke wheel. Are they 19 inch tires? Hard to tell , but the hub caps look like my 30 DA Dodge caps and wheels. Mine have DB on them and made for 19 inch tires. Did you ever find vin #? My steering wheel wheel is not wood rather the old bakelite/resin type. I imagine someone will chime in and let me know the right term for it. Keep us posted. Pics are great! Rod
  20. Thank you for this great thread. What a great car this will be. The tools and know how shown in the pics of this thread are very inspiring to all of us. Rod
  21. Nice car! I hope you can get it. Rod
  22. ebay link: http://www.ebay.com/itm/DODGE-BROTHERS-1929-Model-DA-COWL-TRIM/141080831413?rt=nc&_trksid=p2047675.m1851&_trkparms=aid%3D222002%26algo%3DSIC.FIT%26ao%3D1%26asc%3D17825%26meid%3D1840924577504403241%26pid%3D100005%26prg%3D8234%26rk%3D2%26rkt%3D5%26sd%3D141080829375%26