Jump to content

Dan Marx

Members
  • Posts

    655
  • Joined

  • Last visited

Everything posted by Dan Marx

  1. The markings indicate this is a 1925 Buick 6 cyl exhaust and intake manifolds. These appear to be in excellent condition. I don't see any evidence of cracks. The butterfly is free and complete. $400.00 plus freight. don't hesitate to ask any questions. dlmarx at bellsouth dot net
  2. The tag indicates this is a '31 Buick front axle. This front axle is scripted" BUICK 7", and it appears to have never been on a car. I do not what Buick model that it fits. This axle is in excellent condition. It doesn't appear to have had any bearings on the spindles, I believe they are NOS. There are numbers on the axle pads that are shown in the pix. $450.00 plus freight. Weighs probably 90- pounds. Located in SC. Don't hesitate to contact me with any questions. Replies have indicated this is for a 60 Series Buick, '31-32. dlmarx at bellsouth dot net
  3. It's a '31 Buick Front axle, that's what the sign says.
  4. This a complete axle, can some help me identify it as a 1930 by the part number. That's what the seller says for $150 Dan Marx
  5. The Nash Car Club replied that these carbons will fit the rotors for the big cars Dan
  6. Ok folks, it's marked '31 Cadillac, what part is it? Dan Marx 803-549-2187
  7. Attached are pix of a Kellogg tire pump that ran off the engine, supposedly a '30 Cadillac. Is this real? Dan Marx
  8. I contacted the Nash Car Club and they sent a request thru the MOL to ask for a reply as to the fitment Dan 803-549-2187
  9. NOS, 1968 Buick ignition switch, GM 1116698, with GM key. Sorry, no GM box available. My reference lists this as fitting one year only. 1968 BUICK - ALL FULL SIZE INCLUDING GRAN SPORT, RIVIERA, LESABRE, WILDCAT, ELECTRA 1968 BUICK SPECIAL 1968 BUICK SKYLARK ALL 1968 BUICK'S However, it appears to also cross over to gm # 1116682, please verify. GM Part # 1116682 Group # 2.188 FITS: 1967 Buick 50, 60, 80 & 9000 NOS with GM lock and key $165.00 plus $8.00 postage in the good ol'USA I have three available. Thanks Dan dlmarx at bellsouth dot net
  10. These carbons are 0.245 inch diameter and 0.300 in height. I have sold to other buick list members. $2.00 ea. Postage is $2.62 for any amount. Have several hundred available. Thanks
  11. These measure 0.245 diameter; and 0.300 in height. $2.00 each, postage is $2.62 for any number. Have several hundred available.
  12. 1917-1918 Studebaker (Bushed) 25-4, 25-6 6 3-1/2 1919-1927 Studebaker (Bushed) 25-4, 25-6 6 3-1/2 I have six NOS Studebaker pistons that measure 3.5 inches (acually just under 3.5 inches diameter) .Using the vintage Auto reference they fit the above cars. These have been setting for almost 90+ years, there is surface rust and one is pitted. They are all bushed for the wrist pin. Contact me at eight zero three 425 864 nine or PM me.
  13. NOS MoPar #2585423 choke pull-off for all 1964, 1965, 1966, 1967 Plymouth, Chrysler, Dodge, and Dodge Truck models with Carter AFB 4 barrel carburetor. Barracuda, Cuda, Dart, Fury, Polara, Monaco, 500, 330, 440, Signet, GT, Newport, New Yorker, Satellite, Coronet.This one is stamped marked with 180-137 on the flange. $40.00 ea. postage included in the good ol' USA.
  14. There distributor cap carbons measure 0.245 in diameter and 0.300 inch height. $2.00 each plus postage. 10 ship for the same price as one. If you have the old caps, these get worn, and need to be replaced. Several hundred available. Thanks
  15. 1917-1918 Studebaker (Bushed) 25-4, 25-6 6 3-1/2 1919-1927 Studebaker (Bushed) 25-4, 25-6 6 3-1/2 I have six NOS Studebaker pistons that measure 3.5 inches (actually, just under 3.5 inches diameter) .Using the vintage Auto reference they fit the above cars. These have been setting for almost 90+ years, there is surface rust and one is pitted. They are all bushed for the wrist pin. Contact me at eight zero three 425 864 nine or PM me.
  16. There is a large parts store inventory for sale in Augusta GA . I am posting this for the owner. The inventory includes approx 100,000 grease seals from the early Chicago Rawhide to updated national numbers. The grease seals are all inventoried. The grease seals fit automotive, farm and industrial equipment, some are 12 inches in diameter. These are all early purchases and made in the USA. There is also probably 1000 plus pieces of MOOG TRW suspension, including drag links, ball joints and control arm bushings. Oh, and don't let me forget that there are at least 800 pair of air shocks, all brands, for cars from the 50's -70's.. Several hundred gas caps, and lots of brake parts. There is a minimal amount of early Ford parts. These parts must be moved by October 31. Contact me at dlmarx at bellsouth dot net or eight zero three 4 two 5 8649. This was previously listed in Hemmings.
  17. Studeq identified them by part number 212706 is 0.004 over size Studebsker Big Six dan
  18. The parts were mfg during the Erkine era, fit Stude Big 6
  19. Well, I was able to pick up some NOS Studebsker Erskine Pistons. Thanks to members of the forum we have identified them to be 0.004 & 0.010 inch over. They fit the Big Six. Since I don't have a complete set, I was wondering if they could be machined to match. Regards Dan
  20. 4 standard pistons and two 0.010 over. Old cast iron 1917 . thanks for the replies. Dan
×
×
  • Create New...