tompett

Try this greetings from Norway, Tom bca#8163

Here is my old one, will try do find another picture where you can see the shape of the metall bracket holding the rubber seal TomP

Yes, agree - they are retainers for the spinners. Neatly packed in grease, also marked with the Skylark body nbr they came off. I have bought a lot of parts from the same source, all wrapped up in grease and marked. Tom

Do you still have and use the 1957 original starter heat shield? (picture from Ebay). Tom

What is this for, any particular model/year? Is it 12V? Tom

Agree, I don't trust the bumper jack - just need a correct one for display TomP

See picture, Auto Specialties to LH, Universal to RH.

I am looking for a load member for 1953 Buick jack; the Universal type. I have one 8.820-1163356 for Auto Specialties, but it does not interchange. Parts catalog lists load member for Walker and Auto Specialties, but not for Universal. Where can I get one for Universal? Tom BCA#8163

Where are you at Hershey? tomp

Convertible TOP switch The bracket under the dash is for the Top switch, not ash tray. TomP

I am looking for clip 8.214-4620432, Rr quarter front moulding (from door to wheelhouse). What does it look like? Tom

Thanks, yes, the top switch and tailgate window switch has same part number, # 1192621. I need a picture of a switch, to compare with some non identyfied switches. Tom

hi, so just an accessory switch, not specific top switch? Tom

looking for a 1960 convertible top switch. Tom Pettersen

Thanks a lot, then I know.

Thanks - appreciate the information. Why not complete? 4 main bearings + the rear bearing. TomP

Set of Main Bearings, part nbr 3988 001 and rear 3989 001. Need help identify make and model.

question; It looks like starter number is: 1107667. Parts catalog says 1957-58. Will it be the same for 1959? Tom

Need help identify main bearings McQUAY-NORRIS #3988 001 (4) and rear 3989 001. Tom

You will need to use an older Master chassis catalog here is from 1953;

See picture of 51-55 washer. Filler lid that swings have a little different shape. I believe your style is 1954 or earlier, but not sure.

I think I have seen Ken Mitson, AZ restores these

I believe the 1954-55 50-70 series are 7" long, both sides. (1941-53 are 7,5" and the small series 54-55 are 6"). Have you lowered the car/standing on it's wheels, after replacing parts? Tom

Thanks. 1954 Roadmaster sedan is a one year only back window, Super sedan will be the same. And the Master Body catalog also lists a "4", so Cadillac will share the same, I guess 1954 series 62 sedan. Tom

Thanks, would like to go there. Living in Norway, I'll have to wait. Tom