[Roadster with "Rolls-Like" radiator shell]

Roamer had the RR style radiator too.

[Production numbers reported to the NACC 1928-1932]

On 11/19/2023 at 1:40 AM, Graham Man said:

You want to pick up a copy of this book, great book, it covers the years the Graham Brothers worked with Dodge.  It is maliciously researched and has a extremely detailed bibliography.

 

 

The book is way out of my reach. Are there any other books on Grahams and Paiges?

[Edison Recommendation Spark Plug Chart 1939....]

I tried enlarging the chart but I can't read it unfortunately.

[is this really a Duesenberg chassis ?]

Never seen a Duesy with wooden wheels. 
 

 

[ROFO Ignition Coil?]

I thought it might be Australian. The name rings a bell.

 

Manuel in Oz

[ID these wheels]

17" Dodge wire wheels have 36 spokes in 2s with flat heads. The inner spokes are 3" long and outer are 5" long. They are 5 stud & 1 extra smaller hole.

Hope this helps.

 

Manuel in Oz

[Parked outside Decker's Garage, Staten Island c.1940]

What about the 1933-34 car right in front of the camera? I can't decide if it is a Dodge or Plymouth.

[Car in Wolf Creek Movie]

Definitely a Statesman. 

[Plymouth or Dodge Wire Wheels?]

Hi,

1933-34 Dodge-Plym 17" wire wheels had 36 spokes in 2s with flat heads that were not adjustable.

Inner spokes were 3" and outer 5" long. They were 5 stud with an extra hole.

Cheers,

Manuel in Oz 

[1920s American sedan]

Image won't open.

 

 

[oval headlights - irregular louvers - 30s sedan]

Yes Hudson lights.

 

Manuel in Oz

[Ram Enterprises]

That Ram parts book appears to be a mine of information. Would it be possible to show us the rest of the book?

Thanks

Manuel in Oz

 

[Unknown Early Wire Wheels #3]

What is the stud pattern (PCD) eg 5 bolt holes with a dia of 4" OR 6 holes with a dia of 5"?

They do look a bit like Dodge / Plym. 

 

Manuel in Oz

 

[Original king pin bushing reaming and removal tool]

I can't see a size any where. Did it have the size on it?

 

Manuel in Oz

[Help identify 17" x 3.5" wire spoked mystery wheel 6 x 5.5" bolt pattern]

Looks like 1932-33 Chrysler.

 

Manuel in Oz

[WANTED: TWO WHEELS FOR 1933 PD]

Sounds like standard 17" Plym-Dodge wire wheels.

 

Manuel in Oz

[Online Newsletter......Any Interest?]

Looks perfect!!!

 

Manuel in Oz

[1934 ford tudor glass installiations]

Try fordbarn.com forums.

 

Manuel in Oz

 

[Hubcap Question]

Great information. There doesn't seem to be much around (that I can find) on Dodge hubcaps unfortunately.  Does anyone know where I can find out more on 1930s Dodge caps?

 

Manuel in Oz

 

[An Aluminum Six Cylinder Manifold with Two Solex Carburetors. What car is this from?]

 

Looks like a marine manifold.

 

Manuel in Oz

 

[HEAVY DUTY Rear Axle]

 

Frank,

Does the shaft have any ridges or rings around it. If not and from what I can make out it looks like it may fit 1930s Nashes.

Most Ford shafts from this period had a gear on the end of them.

Cheers,

Manuel in Oz

 

 

[HEAVY DUTY Rear Axle]

I can look it up in my axle book when I get home but it probably won't be for a week......

 

Manuel in Oz

[Adjusting clutch pedal 1923 Hudson Super Six]

Is that a cork clutch?

 

Manuel in Oz

 

[1932 DM DODGE SEDAN (EXPORT) FRAME DIAGRAM]

There is a bit of info here on an Oz DM from Facebook if interested.

 

https://www.facebook.com/groups/1435811830045161/permalink/2150549975238006/?comment_id=2152609105032093&notif_id=1563952949925059&notif_t=group_comment_follow

 

Manuel in Oz

[Online Newsletter......Any Interest?]

Sounds great!

 

Manuel in Oz