Jump to content

Studebeggar

Members
  • Posts

    486
  • Joined

  • Last visited

Everything posted by Studebeggar

  1. have two 32 Fords 32 v8 Tudor matching numbers and 32 4 cyl. pickup rebuilt.. both cars have 3.5 rear gears..760-938-2250 or bigpine55@gmail.com
  2. have 32 tudor mostly orig. car matching numbers.. v8...30K offer trade also 32 Ford pickup 4 cyl rebuilt mechs..18K..7609382250 email for more info bigpine55@gmail.com..desert calif.
  3. have 32 model b ford PU 18K or trade for 30s 40s mopar.....mechs all rebuilt...bigpine55@gmail.com...7609382250
  4. good 32 tudor sedan v8 3.5 rear gear..drive it home ..760-938-2250 bigpine55@gmail.com..offer or trade
  5. have good stock 32 tudor sedan v8...760-938-2250 or email bigpine55@gmail.com for photos and info..offer or trade..drive it home ..calif desert country..32K or offer
  6. looking for 215x75xr16 or 600x 16 black tires wanted ..760-938-2250 or email bigpine55@gmail.com
  7. Tried to remove fan to remove water pump when I started project but failed..,in accessable,..maybe with a specaial tool as the cleaance is just too tight..will have to re think the problem..sc
  8. The old stock fat belt I had to cut off, new belt impossible to fit between fan and radaitor ..too tight a fit ..thot about getting a link belt..could spend a day remowing all bolts holding radaitor ? there must be a better way ?? dynamite or jaws of life ?tnx much
  9. 32 Ford tudor sdn v8 ,newer tires 500 miles..3.54 gears rear end new..several parts and fenders go with car..drive it home ..$32,000...760-938-2250 bigpine55@gmail.com..calif desert country
  10. Have original 1937 D5 coupe with 33k miles stock 218..had a 48" fan belt I had to cut off to get h2o pump off as gen was tight against the block ( old rotton belt ) qustion is belt supposed to 49" or 50 " ?? what temp thermostat 160 or 180 ? tnx ..sc
  11. my 39 starts very good except when it set for 4 months or more,pour a bit of gas down the carb will do it..if car has not been run for years then you need to do lots of refreshing.
  12. tnx much for info..also for 39 mopar folks the vin number is located on left rear hump over axle as well as door post
  13. P 4477240 is in 37 plymouth is it a 201 ? thnx 4 help
  14. look to speed up my 37 Dodge D5..760-938-2250 ... bigpine55@gmail.com...thanks much ..carl
  15. 37 dodge has a heater port in head but 37 plymouth does not ..so how to hook up heater ??
  16. Took trunk floor mat up and no access to fuel sender..anyone have measurements to locate it so I can make a access plate and hole ? not fun to remove tank ..sc
  17. have 35 chev stuff trans ,front end complete and rear axle $250 for all 760-938-2250 bigpine55@gmail.com calif desert big pine
  18. 40 mph without the over rev ..218 motor will do 65 but it would not last long..I know when a motor is over revving and its not a good thing ..been in this game for 50 years ..sc..wish more cars had OD when new...how about a rear axle change to a 3.27 ? anything out of 60's that night work ??
  19. have 19" michilin model A tires to trade if wanted
  20. looking for tires for my 37 dodge coupe 600x16 new or used ..760-938-2250 bigpine55@gmail.com .. calif.. nevada..idaho etc
×
×
  • Create New...