66400

If you go to the Oldsmobile Club of America web site you can find all the chapters listed. Ohio has 4 chapters including 1 in Columbus (MID-OHIO CHAPTER OF OCA 1184 Fairview Ave. Columbus, Oh. 43212) Henry.

If its a Canadian assembled car it came with a Chevrolet Chevelle rear end in stead of the regular Olds Cutlass rear end. <BR>Henry.

The York style commpressor would make it an aftermarket system. <BR> GM dealer installed systems if available would always use the regular Frigidare compressor. Henry.

Give Year One a second chance! You must have caught someone on a very bad day. I've spent from $10.00 to 1,000's with them and have always received great service.<BR>Henry.

<p>[ 02-13-2002: Message edited by: 66400 ]

What a shame! Your Ralle 350 car is a very desirable OLDSMOBILE! Try to keep it all Olds.<BR>However if you must go for a Chev swap you'll need motor mount stands from a '70 Chevelle V8 frame along with Chev bellhousing, flywheel, alternator and power steering brackets, and modify you exhaust system to connect to the Chev exhoust manifolds. Do not discard any of the Olds parts so the car can be restored properly in the future. Henry

All the glass is the same '64-'67 Sport Wagons and same year Olds Vista Cruisers. Henry.

For the sake of conversation the '76 Catalina was available with rectangular headlights or round according to my Hollander parts Interchange manual!<BR>Henry.

One trick I've learned was to spray a light coat of green zinc chromate primer on the chrome, let it dry overnight, next day rub it with fine steel wool before using your top coats. It really seems to stick! Henry.

Secret site? I belong to OCA and thus far not any mention of this site ahs been made in the monthly club publication Journey With Oldsmobile. If it was not for my Buick interest I'd still not know about this site! I emailed a "thumbs up" to the OCA club back in Dec. without any acknowledgment I know once the rank and file OCA menbership become aware this will be an active fourm. Henry.

Don't throw away your cracked ones. A qualified welder may be able to repair them for you. Henry.

Mark Polastry, Weberville, Tx. 512-303-0833 will have them. Henry.

Glass is the same regardless of regulators, which one do you have....switches vary. I have complete system from '66 Wildcat 300 plus shipping. Henry.

Dan if your brother wants to use fender skirts he can get the earlier '67 flat style center caps and it may work. The '68 and newer style caps have the tall "hat" design that sticks out too far and will contach the skirt. Other not so good options is to run sans cap on rear wheels or could also just remove bolted on piece from center cap. Henry

Mark Polastry, Weberville, Tx., 512- 303-0833 has every thing you are looking for. He's parting out 14 '64-'65-'66'67 Skylarks/Specials.

Tom let me ask you what the wheel bolt pattern is in inches. 5 inch or 4 3/4 inch? I think the Parisienne uses Caprice/Impala chasis parts. If so '68 Caprice disc spindles are much easier to find than full size '68 Pontiac. Henry

A couple of nice options not present on the mentioned '68 Caprice would be the concealed headlights, bumper guards and wood sport steering wheel. Lack of fender skirts may be related to the rally wheel option and clearance issues.<BR> i know that '70 Monte Carlos were not available with rally wheels and fender skirts because of lack of clearance with the rally wheel center caps. Henry.

John I have an Hollander interchange amnual and it list the '54 88 fender as being all by its self. The '54 98 fenders are listed under different numbers. So from my info you'll need a '54 88 fender. Henry

You may find that it's overpriced! I know of two in my local area that can be purchased for less than $50.00 apiece. Henry.

Olds and Chevy posis do not interchange from that era. However Canadian built Cutlasses were equipped with Chevy differentials. Henry

You might check the the k-frame/front crossmenber from a '63 Pontiac Tempest equipped with the 326 engine. It may replace the Buick/Oldsmobile crossmember in your car. Henry

I've a pair of t-tops for a '75 H/O I'd take 300 plus shipping for. Or 1000 for nearly complete Air cond, tilt, power window,W-30, white parts car that runs. Missing shifter/console/HO emblems, title. Consider trades for '66 442-Cutlass-f-85 items or Olds "B" bodied Apprehender componets. Henry in Austin, Tx.<BR>henry_polastry@altavista.com

Mark Polastry in Webberville, Tx. would like to purchase '64 thru '67 Skylark and Special project cars and parts cars. Will also consider Olds Cutlasses of same year group. <BR> Must be in the Central Texas area. Phone # 512-303-0833. Henry

Mark Polastry in Webberville, Tx. will have tri-shield mirrors, fenders and bumpers from 15 '64 thru '67 Skylark and Special parts cars. His # 512-303-0833. Henry.

1970 Cadillac Eldorado had 500 cubic inch engine with 400 advertised horsepower. Henry