Jump to content

mastertech

Members
  • Posts

    337
  • Joined

  • Last visited

Everything posted by mastertech

  1. Looking for Qpanels for a 64 fairlane cp. NOS or used in good shape. I am going to hershey this friday and saterday . If have anything e-mail me and can make a meet if you are going also. If you have any and are noth going let me know anyway and we can figure something out. thanks Melvin Schwentner DuBois Pa.
  2. I have chrysler mastertech books for sale I have one compelete set in binder from 1947 the first yera out for master tech. Also a parts book for 1955 dodge trucks. also other books mostly chrysler and AMC/jeep spec and master tech from the 50s and 60s and 70s. all are in very good shape have some newer mastertechs for the 90s also all are orginal from chrysler and AMC/JEEP as i have work for chrysler dealership for 30 years. Email for complete lisr and Pic. mastertech8997@yahoo.com
  3. need to sell my baby a 1951 desoto s15 4door. Runs great 6 cylinder engine fluid drive work very good. Needs restored 98% complete. selling due to money problems. Should have pictures on web site in a few days if interested Email me at mastertech8997@yahoo.com. I have pic on camara i could send thur email untill get web site ua and going
  4. For sale 1951 Desoto S15 custom- Runs great 6clyinder fluid drive works perfect. Radio(not working, Heater. 95% complete chrome Bad but there. all trim there some damage. Everything works but radio. Last drove this summer appx 11 miles. I have owned this car since 1991, and havent been able to get anything done on it. Dont have roon for it and no garage to work on it. And finical problems are forcing me to sell. Located in DuBois PA. asking 1,200. Contact me at mastertech8997@yahoo.com I do have pic adviable Just have to get my daughter to show me how to put them an the puter.
  5. It did work when i disassembled it about 5 years ago, I finally found a ring that wasent broken it is a full circule ring. all the plastic insulaters are there Havent gone out to look at it tonight the wife is in an uproar.
  6. I really feel like a dummy right now. The horn ring on my desoto is apart and trying to put it back together and cant figure it out it either blows all the time or not at all. I have all the parts but just cant get them in the right order. I put the triangler shaped part in first then a round concaved washer in next (dished side down) then a large toothed type spring teeth up then the fiber and metal ring on to which the ground wire connects to then the horn ring with three screws which go though plastic gromets when i tighten down the screws the horn ring goes down to far and grounds out the horn causing it to blow now if I dont tighten them up all the way then the ring is loose an slides one way or the other and still grounds out and blows. Not sure if I am putting if together right my service book does not show the horn ring. This thing is driving me up the wall I have put these together on other cars many times before in the past but just cant figuer this out.
  7. I have a buddy who is looking for a used enclosed car trailer. I figured that if anyone out there might know where i can find one its on here. What he is looknig for is a 24-28 foot enclosed trailer. He is hauling of all things is a 2000 modifided mustang. (not going to hold that aganist him). Trying to find one in western Pa. if possable. would like an older one even if ti needs work. Please email me at mastertech8997@yahoo.com
  8. drive it all summer long rain or shine with no problems. But then I specialize in auto computer and electrical systems. Havent done anything special just made sure everything is up to par. Now if i could get the brakes to work just as good
  9. I work as an auto tech at a chrysler dealership in my area, well yeasterday the temp outside was a nice 18 below zero in aur area. My wife leaves for wirk at 6:30 am so i start her van since it set outside, well it barely started turning over slowly but starting, now this is a 2002 Dodge. I leave at 7:15, go out and start my 89 plymouth, no go justs turns over to slow to start. Now thinking of what to do, I can call the garage and they will sent someone to pick me up or........try my other car which hasent been started in at least 3weeks, well lets give it a shot. Now everyone is always giving me a hard time beause of this car which is not restored but in good shape for the year. Put the key in the ingition cross my fingers, turning over slowly at first the faster then it fires and runs. I let it warm up a few minuites and off I go. Getting to work i notice that only 2 other people are there, after picking up the others in the car they make fun of all the time, they now have respect for the old beast. The beast was the talk of the day with both workers and customers. The car .... a 6volt 1951 Desoto. Just wanted to share my pride in my old car.
  10. the new lady wants me to get it done so we can go crusing
  11. I live north of the turnpike but the gas prices are in the 1.30-1.135 range for regular as of 4/30/02
  12. thanks for your help. I feel kinda ashamed have owned the car for 10 years and havent done much research on it. Now want to try and get it back on the road agian. I am starting to track down some yards that have older cars.(xwife didnt allow that) thanks for the info. will keep in touch on any developments
  13. trying to find out what year of rear fenders will fit this car. The service manual is set up for 49-50-51, are the body styles the same? I know they look much the same, also i have seen a dodge of the same year the body look much the same but the rear fenders were missing. Having a hard time trying to find any parts for this car. Guess i better say what it is, 1951 desoto s-15 4dr sedan. Looking for a left rear fender.
  14. that was going to be my next question, as to what fenders will fit. I dont think 52 will work, slight body changes. as far as the coupe not sure but i dont see why not.
  15. boy I screwed that up fprgot to put in my email address still need left rear fender or info on where to get one its a 1951 desoto s -15 4dr sdn. email me with any info at mastertech8997@yahoo.com
  16. I work in a chrysler dealer ship and was wondering if anyone out there is interested in any sales flyers banners and stuff like that?? They just throw this stuff away. I use to gather it up and save it, but now i have no room for it. This would be for the new cars and like i said I have no where to store it untill it is really worth anything. So if anyone is interested let me know I will gather it up when they throw it out and save it for you all i would want if shiping fees. email me at mastertech8997@yahoo.com<BR>thanks<BR>melvin schwentner<BR>1951 desoto
  17. Must sell asap moving 1951 Desoto s15 4dr sdn<BR>runs great trans works perfect needs restored. $1200.00 obo.<BR>Car located in Reynoldsville Pa. off exit 15 I80. email me at mastertech8997@yahoo.com. for more info
  18. Must sell moving, 1951 Desoto s15 custom 4dr sedan 62k orignal miles. Needs restored runs great fluid drive works great. 1200. OBO
  19. I have a 1951 desoto s15 custom sedan for sale needs restored most all parts there runs great trans works perfect. 62k miles original. also have old dodge truck parts book for sale very good codition 1956, covers most all trucks. also dodge truck sales manuel from 1961. also american lafrance operators manual from 1927. Must sell all the above lost storage for car. I will be at hershey some time friday will be staying at hershey high medow campground. will bring all books. pictures of car. emaile me if interested for more info.<P>
  20. mastertech

    Advice needed

    Phil<BR>You didnt say what engine you are working on, but I dont think i would pull the heads off the engine to remove the carbon unless you are having mechanical problem. An easy way to do this is to go to your area Chrysler dealer and purchase a can of Combustion Chamber Cleaner, (im sure other makes use the same stuff). You spray this down the carb when the engine is running to the point of almost stalling out them shut off the engine finish off the can into the intake let it set for awhile then restart the engine, it will smoke quite a bit untill all cleaned out. I have been working on cars for 25+ years and using this stuff and never had any problems using it as long as you follow the directions. Back in the 70's we had a problem with carbon knock on some AMC engines and that was the factory fix. Lately have had some engine missfires due to carbon build up on chrysler engines and that is the factory fix. I quess the best thing is to take all ideas you get and chose the one that you think is best. good luck
  21. For sale 1951 Desoto custom s15. Needs restored. 99% complete, runs great fluid drive works has radio(not working) 6cyl 62k orignal miles, comes with owners manual and sevice manual. Must sell!!!!!!!! more inf contact me at mastertech8997@yahoo.com
  22. I have a Dodge "C" Series truck parts book Issue of July 1955 with up dates to Feb 11 1957. Also in book is parts supplement for "C" series truckd with tandem drive rear axle, Models KX, TX, and YX. asking &100.00. Or best offer<BR>Also have a Dodge truck saled manual covering all dodge truck models dated sept 1961, asking &50.00 OBO.<BR>Also have an American LaFrance opreator's manual, copyright 1927. asking &40.00.<BR>All above Books are in very good condition. Must sell all above in a timely manner.<BR>Please contact me at mastertech8997@yahoo.com
  23. looking for a left rear fender for a 51 desoto s-15.
×
×
  • Create New...