-
Posts
970 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by Mr Riviera
-
-
I met Hardy at the ROA meet in 14 and had the opportunity to drive the black 65 GS in the first picture . Very nice car and a GREAT GUY ! I was lucky enough to visit Hardy and his family a few months back in Houston and had a wonderful time . As we go thru life we meet a lot of people but remember few as years go by - I will NEVER forget Hardy Rawles . RIP my friend - we will meet again !
-
I will be there after leaving the BCA Nationals in Denver . I will stay at the The Double Tree to help support the Club .
- 2
-
The Car won 2nd in the ROA Reno meet in June .
-
Sorry I missed you Alex . I am 30 miles East of San Diego ! Will be in Vancouver for a few days the first part of April ?
-
I have a friend that wants to do this , who is making the kit for the conversion ? Thanks in advance ! Dick
- 1
-
I guess the BJ sales price on their web page inc. their commission . 10K or so.
-
65 Resale Red Riv. GS sold for 117,700 in the last couple of days . New owner may want the rest of the vinyl top molding that is missing . Needs help .
-
It is listed at going for 117,700.00 - Resale Red . Perhaps I can sell the new owner the rest of the vinyl top trim that is missing .I can take the bar under the rear window on trade ! Dont want to go into the rest .
- 2
- 1
-
In my case with one set , they were on a car that I sold . I removed the plates and the car went to Wisconsin . I sent DMV the report of sale .
-
LOL - Problem is I want to sell the plates and dont want the buyer to have a problem !
- 1
-
Good point , I will know more tomorrow . Tks
-
2 hours ago, RivNut said:
Very difficult job. Most go through the console. Your mechanic says it's blocked, but is it leaking? I had a bloccked heater core on a different vehicle once and the mechanic reversed the hoses and it flushed itself clean. Might be worth a try. Easier to do toward the front other engine too. The hoses are different diameters so if I were you, I'd buy some extra hose and use some reducers to make it easier to deal with, no cutting or stretching of the good hoses. Somewhere on this forum, there's info on filters you can put on radiator hoses. If you can flush the heater core, you might be loosening up some junk that you need to trap before it gets into tne radiator.
Going thru the firewall is a lot easier ! Less chances of breaking a number of small parts . Call me anytime and I will walk you thru it . For a filter I use a kit made for Jaguar , google Jaguar coolant filter . It is placed within the upper hose . Inside a cup is a screen and the cup has a screw on cap to clean the screen .
- 1
-
I will give it a try tomorrow and report back . Thanks
-
Does anyone know how to clear YOM plates in Calif. DMV ? I have a nice set of black and yellow that I want to sell but dont know how to clear them . I went to DMV , stood in line for an hour only to be told that I cannot sell the plates ???? Any help would be appriciated by me and someone that needs them . thanks. Dick
-
-
Thanks , that car has been sold and I have a better one now ! Small emblem and every option . Thanks , Dick
- 1
-
-
Find another transmission shop . It takes about 10 minutes to get the gear out to see if the teeth are stripped - if they are I may have the gear . Very simple job . Its a common problem . I have 18 tooth gear .
-
-
Jenkins has material that is very close to original . I dont know how much they have left so get your order in if needed . I have no connection with Jenkins . I do not know anything about the cardboard .
-
VERY RARE
-
The one I am talking about is 65 Riv both radio and a/c delete .
-
I know where there is a nice one out of a 65 . What is it worth ?
-
Check the line that goes down to the modulator to see if it is plugged up as well .
65 Riv GS on ebay
in General Discussion
Posted
Does anyone know anything about this car . It has a ROA Sticker in he rear window . https://www.ebay.com/itm/283416784014