John

Pickup an old Delco catalog from ebay, or google search will ID most of them. Question is do you want to invest the time in selling them---they won't fly of the shelf unless priced very competitively, and there are lots of them out there still.

Better photos added.

attached

Wheel available, call me for details.

Between this site and V8Buick you might be able to find someone to give it a ride. Plenty of folks from MI going to Hershey. If not, yes I will ship if not sold there. Will PM you a phone number as I wont be checking here much while at Hershey.

I have one 991 wheel I am bringing to Hershey tomorrow, and will be there at least thru Wednesday. Can't post a picture as it is already loaded in my van, bottom of load. Very nice condition. $100. John

Contacted Eaton Customer Service/Tech Support and they were no help.

It came with some mid 70's-early 80's Chevy passenger and truck parts....

The dual quad intake and carbs are sold together, $1800. The power antenna is $150.

Approximate dimensions: Length 5.14", Stem Diameter 0.36", Head Diameter 1.33". Parts are stamped "Eaton V-966". Eaton does not follow McQuay-Norris numbering as prior owner assumed.

The 1933A fits Buick, 1936 60 series and 1936-1939 80-90 series; front left.

Do you have the casting number of the one you need?

Will have some of the above at Hershey, Green field spaces GAC 14-15-16.

Where located?

Bob, the hole for the center cap on the 65 wheel is 2", for 68 it should be 2-1/8". John

Buick # 1397788 and 1397789 Axle Shafts. Fits the following: 1941 - 1942 40,50,60,70 series 1946 - 1950 40,50,70 series 1951 - 1955 50, 70 series $250/both, local pickup, near Allentown PA. Possible delivery to fall Carlisle or Hershey. Will separate if no interest in the pair.

Chromed diecast

Yes, 67 GS inner and outer bearings are same as on Special/Skylark, also same for Chevelle/Malibu/SS, F85/Cutlass/442 and Tempes/LeMans/GTO. Inners are Delco set S6 (LM67048-LM67010), outers are Delco set S5 (LM11949-LM11910)

Is there a group number printed on the package? What is length and width of part?

Will be at Hershey flea market spaces GAC 14-16, Monday-Thursday, 10/2-10/5. NOS Headlight Bezels: 1965 Skylark/GS RH 1966 Skylark PAIR 1967 Skylark exc GS PAIR 1968 Skylark/GS RH 1971 Skylark/GS PAIR 1972 Skylark/GS PAIR Other NOS: 1960 All, Park & Turn Signal Lens RH 1964 LS/WC/EL Backup Lens PAIR, 1964 LS/WC/EL Cornering light Lens LH 1964 LS/WC Hood Lip Mldg 1966 Skylark/GS Tail Lens RH 1966 LS/WC/EL Headlight Asm with T3's 1967-1968 WC/EL RH Fender Skirt 1969 Skylark/GS Front Wheel Opening Mldg RH 1972 Riviera Tail Light Bezel LH 1950's AC Guide 300 #6006 6-V Headlights with T3 Logo 1960's Top Engine Cleaner, 1960's PF24 Oil Filters white housing 1960's Saddle Front Floor Mat, 1 piece with white tri-shield in center Used: 1937 40-60 steering column with wheel. Steering gear fits 1938 40-60; 1939 60 (early) 1950 All series grille surround "mustache" 1951-1952 grille 1955 Special and Century grille surround "mustache 1957 Super & Roadmaster rear bumper center section. 1957 Super & Roadmaster grille surround "mustache". 1958 Roadmaster & Limited Stainless Rocker Moldings, pair 1961-1963 215 V8 aluminum 4 barrel intake manifold. 1963-1965 Riviera power antenna 1964 dual quad intake & carbs from Super Wildcat 425. Carburetor numbers 3645 and 3646, dated AJ3 and AK3 respectively. 1964 aluminum valve covers c/n 1366222, 1366223 from Super Wildcat 425 1964 Skylark grille and headlight bezels, very nice. 1964 Riviera black steering wheel & hornbar; wheel also fits 63 Riviera & 64 Electra 1965 Color and Trim dealer showroom book 1965 LeSabre/Wildcat/Electra AM/FM radio 1965 Special/Skylark plastic instrument cluster surround 1965 Skylark tail lights 2 LH 1966 Skylark/GS Tail Lens LH 1966 quadrajet intake manifold from Riviera 425 1967-1970 GS & Sportwagon aluminum brake drums, worn to limit & cores to reline 1970 Color and Trim dealer showroom book #813 code chrome wheel, 1966-1967 Skylark/GS #991 code chrome wheel, 1978 -1987 Regal?

The parts book is clear that the lenses changed for each version of the complete lamp. What is not clear is what happened with the other parts. The "mounting bracket" changed, but the "body assembly" did not.

My Buick parts book dated 1945 shows different part numbers for early versus late 1937, and yet another part number for 1938. Anyone know how to tell the difference?

Now I have a pair of them!

Case closed---Thank you drwatson!

What I see sure looks like a match! The housing on mine needs about 1-1/2" beyond the mounting surface; does it seem reasonable it would fit?