palbuick
-
Posts
1,114 -
Joined
-
Last visited
Never
Content Type
Forums
Gallery
Events
Posts posted by palbuick
-
-
Just returned from Swap meet with a Headlight lens, and I can't identify.
Its a FLEXIBEAM , PART NUMBER 13029 LEFT. 8 15/32 x 9 3/4
Any help appreciated.
Jim Schilf
palbuick
-
I am not positive but all Buick Trans , 3 speed, had a top cover of 5 bolts or 6 bolts, up to 1960
From the straight eights to the V8,.
and were torque tube drive trans , enclosed drive shafts.
Side cover trans could be chev, or ??????????????????
Jim Schilf
palbuick
-
Sorry, but my book has no listing for this part number on a Tilt Ray lense
Jim Schlf
palbuick
-
Cleaning garage again. 3 short blocks for sale
NEW ORIGINAL 455 short block, 1973 to 76 , pistons, rods, crank. Never installed , NEW from factory. Price is $ 1100.00
364 c.i. Short block, used. has the 11:1 high compression pistons, casting # 1173201, puts it as a 1959-61 block Has no Engine code # only a production code #.393639. On one piston there is still a partial printed part number, if motor had been run it would have burned off. Has pistons, rods, camshaft and crank, timing chain and gears. Turns over smoothly
Price is $ 275.00
401 c.i. short block. used. This bloch has been bored out to .040 over. Casting number 1185484
engine code # 4F114009 (1959) Motor had been run, carbon on pistons. Cylinder walls look clean and smooth, no ridge. Has pistons, rods, crank. Turns over smoothly.
Price is $ 275.00
Pictures available. QUESTIONS?
Located just outside of Rockford, ILL
PICK UP ONLY. I CAN LOAD INTO YOUR TRUCK OR TRAILED
JIM SCHILF
PALBUICK
-
Most all these lenses will have a part number on them. Check carefully all around back side of rim of glass, or possibly under the tiltray lettering.
palbuick
-
Please don't ask why block is painted RED. I don't know why.
-
1959 Buick Nailhead Short block ( used) +0.40 overbored pistons, rods , crank.
cylinder wall look clean and smooth no sign of excessive wear, no top cylinder ridge.
This is a 401 motor, 4F114009. From checking wall and pistons this motor seems to have had little use after boring and installing pistons.. Turns over smoothly.
Price is $ 275.00. Thats the price the pistons would cost.
PICK UP ONLY
Located just outside of Rockford Ill.
Pictures.
Jimn Schilf
palbuick
-
Lense should be Tilt Ray Part number 918414
Check carefully around back edge of glass and try to locate a part number
-
For sale NEW carburetor mountin studs, replace those broken or stripped studs.
These studs will fir most carburetors from the 30's throught the 70's
Two lengths available 1 1/2" and 1/3/4"
Black studa re 1 3/4" long with a 3/4" x 18 thread, and a 7/8" X 24 thread.
Gold anodized studs a re 1 1/2" long and have a 1/2" X 18 thread, and 3/4" X 24 thread.
Both have a shoulder seperating the differen threads
Package of 4 studs $ 1.25 plus $ 1.25 shipping USA
These ar new studs.
Jim Schilf
pal;buick
-
For sale
NEW carburetor mountin studs. Time to replace those broken studs.
Two sizes available. 1 1/2" and 1 3/4" length.
Black studa are 1 3/4 long , and have a 3/4" x 18 thread and a 7/8" x 24 thread.
Gold anodized staud are 1 1/2 " long, and have 1/2" X 18 and 3/4" x 24 thread.
Bothe have a shoulder seperating the threads.
Package of any 4 $1.25 plus $ 1.25 shipping
These are NEW studs.
Will work on most intake manifolds from the 30's to the 70's
JIm Schilf
palbuick
-
What type of shocks? Tube type, or lever action.
I have some catalogs on lever action shocks, 30' to 50's.
Jim Schlf
palbick
-
I am located 3.1 miles east of the clock tower.
Turn left on Beaver Valley rd.
One mile north is Squaw Paririe rd. Turn right
2/10s of a mile is Paririe rd. I live at Squaw prairie and prairie, 2212 Squaw prairie rd.
Drive to garage is in rear of house. No room in garage so parts will be all over drive.
Should have a few signs up.
palbuick
-
Have about 1500 original AEA tune up charts. From 1928 to 1965. Cadillac, Buick, chevrolet, Franklin, Lincoln, a coupel Pierce Arrow, Even crosley.
palbuick
-
Packin 31
I hae one jack identified as a Packard, but don't know what year it is.
It is a screw type with a long folding handle.
Jim SChilf
palbuick
-
Found two pairs of Trippe lights, excellent chrome side mount rear view mirrors.
Will be digging for part all week. Old trunk.
Jim Schilf
palbuick
-
Having a GARAGE SALE on Aug 25, 10 am to 6 pm
This is for those attending the AACA Blackhawk Regional Show in Rockford, Il At the Clock Tower Inn.
I live about 5 Miles from the clocktower, just east of it.
I have about 20 old jacks from the 20s & 30s and some early Misc parts.
If you have nothing to do on friday take a ride, you might find early literature, sales and magazine ads , parts. even some antique items. Lots of BUICK parts
If you have time on your hands take a ride, plenty of off road parking,
E-mail for directions
Jim Schilf
palbuick
-
Several years ago I sent my 40 running boards to Hunley to be rodone. I tried chiseling off the old rubber, after 2 hrs and a BIG mess. I sent them to hunley where for an extra 75. he cleaned them off, he told me he burned the old rubber off. Considerinf the time and mess it was well worth it. The boards looked like they just came off the dealers parts shelf.
Jim Schilf
palbuick
-
Have the following parts for sale, will fit the 1940 LImited only. 80/90 series
One pair of front shocks, selling as cores, need rebuilding. $200.00
Front fender sidemount covers, in excellent condition, no rust or rot, stainless has a few dings.
covers only, no hardware, $ 425.00 pair.
Shipping extra.
Pick up and save.
Located near Rockford , Il.
Jim Schlf
palbuick
-
I just printed a list of wiring harnesses off site www.riwire.com/catalogs/40/cat21.htm
Looking for harness for my 40 60 series, they also had 40 40 series. Complete harnesses and 11 different assemblies.
Jim Schilf
palbuick
-
This is the Skylark that just sold at the Mchum auction in May, If I remember the selling price was around 28-29K. there were no quarter side emblems, possibly bondo quarters, wire wheels had weak chrome and no spinners. Top was shot, front seat did not match rear seat as far as pattern.
A very old restoration.
Jim Schilf
palbuick
-
UNIKITO
If you havent found your gear yet, I have a NOS and a good used gear for your 39 RM trans.
The new gear is part number 1296505, fits 1937 through 1940, series 60-70-80-90, , 31 outer teeth,
The used gear is the same but shows some wear but no broke teeth.
Price on NEW gear stillin original Buick box is $ 95.00 plus shipping and the used gear is $ 50.00 plus shipping, shipping should be close to $ 6.00.
I am packing up to go to Minn. tonight and tomorrow and leaving early Wed morning, If i havent heard from you before tuesday night, the gear will be in Minn.
Contact me directly at palbuick @ aol.com
Jim Schilf
-
WHY NOT POST YOUR WANTS HERE FIRST.
palbuick
-
Probably for fog lights. This was carried on until 1948-49.
palbuick
-
I just found a pair of NEW ROTORS for the full size buicks, Wildcats, Electra, and Riviera.
Still finding large heavy items I don't want to bring, Like a pair of NEW front fenders for a 64-65
Opel Kadett
JIm Schilf
palbuicik
Help//// Identify hEADLIGHT LENSE
in What is it?
Posted
Hello and a big thank you for the identification.
That is the correct number 14029. My thumb got in the way of my eye and couldn't see what i was typing.