Hinckley Bill

Just measured the bore and it is in fact 4.5"..... Oh, also found this 'homebrew' tool that may have some use?

Here as a 'newbie on a mission' To make a long story short, I'm trying to help the family of a recently deceased buddy of mine (Gerry Ruschke) sell a couple of items I believe were made for a two-cylinder 1912 Maxwell that his brother (Larry Ruschke) owned and left to Gerry when he passed about 5 years ago. The car was sold about 2 or 3 years ago but these obviously new parts didn't go with the sale. I did some 'googling' and found a partial picture of Larry's Maxwell, as well as pictures of two cylinder Maxwell motors, the latter of which make me believe that the two pieces I have are new 'cast' cylinders for this model of car. I'm attaching pictures of the two new cylinders I have to sell. If anyone cares to chime in on whether my guess on the parts is correct I'd sure appreciate it. Thanks in advance for any/all help given Bill

Appreciate the shout back my friend....I'll definitely find the Maxwell Forum and go from there! Bill

Good evening to everyone here on AAC.......my name is Bill H. also known as Hinckley Bill on a bunch of remote control airplane sites.....you can check that I've done a whole lot of buying and selling of my main hobby over numerous years. "Why Hinckley Bill?" - I live outside the little town of Hinckley, IL, about 60 miles southwest of Chicago, IL. "What's an RC guy doing on this site?????" To make a long story short, I'm trying to help the family of a recently deceased buddy of mine (Gerry Ruschke) sell a couple of items I believe were made for a two-cylinder 1912 Maxwell that his brother (Larry Ruschke) owned and left to Gerry when he passed about 5 years ago. The car was sold about 2 or 3 years ago but these parts didn't go with the sale. I did some 'googling' and found a partial picture of Larry's Maxwell, as well as pictures of two cylinder Maxwell motors, the latter of which make me believe that the two pieces I have are new 'cast' cylinders for this model of car. I'm attaching pictures of the two new cylinders I have to sell. If anyone cares to chime in on whether my guess on the parts is correct, as well as whether this is the site I should be listing them for (and perhaps a ball park price too if possible?) I'd sure appreciate it. Sorry for any inconvenience this post might cause. Bill