39 Coupe Express

Carbking I will get in touch with you on monday thanks

I see alot of the BXOV's but I'm not sure that they are the same. have to check closer. The choke setup and linkage maybe different. thanks

I am looking for a good usable / rebuildable BXO-26 for my 39 CE My engine is completely rebuilt and lacking a good carb. If someone has one let me know thanks

I have think about soldering a piece of rod to the back side of one of the rings I have. It has a groove in the back and plan to roll a rod to the diameter of the groove and TRY to solder that to hold the shape. Just an attempt to see if it will work. The pot metal is a pain because you don't know what is going to happen..

Which book are you looking at. it has much better pictures than the master catalog that I have. I believe this is for a 9A but I am putting it into a L5 coupe express. Just me but I think the truck deserves a good wheel.

I am looking for a horn ring for a Phantom wheel. part number for the wheel is 192811 . I have tried 2 from ebay and none are right. Any help would be appreciated. even the part number. this is a wheel that is divided into 3 equal sections. thanks.

fh4ever thanks for the info. I have the manual and as you said it's pretty lacking in detail but I will look at it again and see what I can come up with. as for your cracked spokes I would have them tig welded. I am/was a welder for years and that is the way I would have them repaired. It is very controlled heat and should do the job. thanks mark

Sorry for taking so long to reply. It is a full circle ring

I am putting a phantom wheel on my 39 CE and looking for a drawing with the placement of all the parts to operate the horn. thanks

I would like more information on these parts. I am finishing a CE and may need a few of these things. Price and location thanks

hello all I am looking for a horn ring for a phantom wheel part number is 196631 ( I believe ) I bought one from ebay but is too small by a little bit and won't work. If anyone has one in their stash let me know thanks

Chris I think there's a small pin that has to be pushed out so the lock cylinder can be removed. That's what I had on my 39 CE

Hi All I'm looking for an instrument panel cover for my 39 CE. The clear acrylic lens with all the number on it. Mine has cracks that are in the middle of the castings and can't be buffed out. Part No. 267303P. I believe commander part will be the same. Thanks for any input or answers Mark

Robert I am in the middle of restoring my 39 CE and don't have a temp gauge. I am just checking to see if you have one. Part num. 193147. It would be great to find one. thanks for looking and posting that you have parts available. I may have other parts that I will be looking for so I will let you know what else I maybe looking for. thanks Mark