StudeLS3

I know my parts are not exactly what you are looking for but if you would like to see them you are welcome to come and see if any of them are the same.

I'm not sure I understood the squared/round water plate description. The one I have is rectangular with rounded corners. The whole end is not round. I would send a picture but would have to have one of my grandkids do it. :>)

The corners of the water plate are rounded. The end boss is clean and painted, I will use the wire wheel on my side grinder and remove the paint. I can see the #16 real plain now and no other numbers show. I will check again after I remove the paint.

There is not a number above the water jacket and on the end boss there is just the number 16

The parts come from a President Victoria. The tag on the fire wall is FHC with some numbers behind that. The parts I have are mechanical parts no body parts.

The casting # is 157457 2 3/29 I could not find a stamped number. Maybe someone can tell me where to look.

I will check tomorrow.

Parts are located in Zeeland Michigan. I am trying to find information on how much these parts are worth but can't find much on things this old. The engine, I was told was overhauled approx. 35 years ago, was reinstalled in the car and never run. The engine was in Victoria and if it is the big or small 8, I have no idea. I am sure the engine would have to be disassembled. The bearings might be OK but I am sure the cylinders will need work. I will try to find out if it is the big or small 8. Thank you

Parts for sale from a 1929 Studebaker Victoria: straight 8 engine, generator w/water pump,intake and exhaust manifolds, distributor with spare caps, fuel pumps, extra 8 cyl. head, tested radiator and fan, starter, 1 set brake shoes, complete front suspension, complete rear axle, rear axle shaft, bell housing, steering wheel and column, clutch and brake pedals, and some misc. small parts