B Rogers 1946
Members-
Posts
24 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Everything posted by B Rogers 1946
-
Here is the first run of the 3D printed glove box cover. It is a little dirty from fitting and handling. I feel it needs a slight adjustment on top to accurately match the dash lines. The cover is paintable and that is the next step to see how it takes paint. Cover fits snug to metal back plate. C38-1947 I will check on if they can color match. I have a maroon 1946 Windsor.
-
I have a 1946 Chrysler Windsor with the plastic over metal glove box door. I have a 3D print company making up a new cover in Nylon for durability. The prototype (1/2 of the cover) fit well and snapped on. They should have the completed versions this Wednesday (3/9/22) and I can report back with pictures. If it works I have already paid for the design so it would be just the print costs for you. Let me know if you would like to see the completed version. Bruce Rogers
-
Front Fender Shield Assembly 1946 Chrysler
B Rogers 1946 replied to B Rogers 1946's topic in Parts Wanted
Joe, Thank you for your time. I look forward to hearing from you. Bruce -
I have a 1946 Chrysler Windsor with the plastic over metal glove box door. I have a 3D print company making up a new cover in Nylon for durability. The prototype (1/2 of the cover) fit well and snapped on. They should have the completed versions this Wednesday (3/9/22) and I can report back with pictures. If it works I have already paid for the design so it would be just the print costs for you. Let me know if you would like to see the completed version. Bruce Rogers
-
I am looking for the front fender shield assembly for a 1946 Chrysler Windsor sedan with a 6 cyl. The part numbers I have seen are: From Chrysler Tech Sheets - 1121186 and 115067 From Mopar Sheet Metal Document - 12-04-04. Thanks
-
Looking for front fender shields (upper and lower) for 1946 Chrysler Windsor. Appears sides are interchangeable. Primarily interested in Driver side.
-
Looking for upper and lower front fender shields for 1946 Chrysler Windsor. Driver Side (it appears sides are interchangeable).
-
In my research for the distributor wire between the points and the negative terminal of the coil I have seen mention about converting to electronic ignition. If I went that route is wire still necessary since you hook to positive and negative terminals of the coil? Thanks to all of you for taking the time!
-
Here is a better image. C49er thank you for your photo that helps. Now I have to find the fine wire you all mention. The research begins! Thank you all for the quick replies.
-
I am in the process of starting up the 6 cyl. engine in my 1946 Chrysler Windsor. While changing the points and condenser I noticed a newer wire in that area (see photo attached). Is this wire suppose to be here? I can turn the engine over, checked the coil and new wires. Any help is appreciated.