Occaswright

During the early 20th Century, The Adamson Manufacturing Co. of East Palestine, OH sold several models of vulcanizers to press rubber patches on to inner tubes. This is the Model E as seen in the first photo from the 1918 Horseless Age Ad. Other than surface rust, this tire tool is in nice condition. It would be a nice addition to an early auto tool display. $45 including shipping. Glenn Hamilton, Dayton, OH.

Two original brass Maxwell-Briscoe Data Plates with nice patina. 3.5" X 1.75" no dents/tears 1907 Model R-S #4347 12HP 2-cyl Runabout with Divided Seat. 1909 Model L-D #7002 14 HP Runabout. $30 each or $50 for both. Complete your car! Shipping included. Glenn Hamilton, Dayton, OH

Two original brass Maxwell-Briscoe Data Plates with nice patina. 3.5" X 1.75" no dents/tears 1907 Model R-S #4347 12HP 2-cyl Runabout with Divided Seat. Priced at $825 1909 Model L-D #7002 14 HP Runabout, Priced at $825 $30 each or $50 for both. Complete your car! Shipping included. Glenn Hamilton, Dayton, OH

Packard Model 30 engine parts from the Bob Erasquin Estate. Sold 'as is' but generally in very nice condition. More to follow. Upper L: Eight original brass lifter guides. Excellent condition, little wear observed. These match my 1909. Likely good for all years.1907-12. $500. Combine with #2 for $900. Upper R: Nine original steel tappets. Nice condition, little wear observed. Two missing adjustment bolts. $500. Combine with #1 for $900. Diag: 1910 UB camshaft. Undamaged, but tolerances not measured. Likely fits other years. $150. Lower L: 1910 UB Radiator Outlet Drain. Complete, untested, some wear. $100. Lower R: 1907-1912 Complete 8-piece Spark Plug Wire Insulators. Nice. $350. More photos available. Shipping calculated separately from 45419. Glenn Hamilton, Dayton, OH

This original 1911/12 Packard horn is from Bob Erasquin's model 30/18 parts collection. He identified it as 1911/12, confirmed in above original Packard Motor Car Company photo from The Making of Modern Michigan Packard Collection. Rough but restorable, accompanied by several reeds and a few connector parts. Can supply more photos if requested. Additional items to be posted, as time allows. $200 OBO plus shipping from 45419

Looking for a pair of defrost vents for a 1941 Ford pickup. They look somewhat like the attached photo from Ebay which is too big, 5 1.2 inches. They are 4 inches from mounting hole-to-hole and have a 1 3/4" OD heater flexible tubing connector. They're larger and narrower at the vent than the ones supplied by the Early V8 Ford parts suppliers. Please email photo and price with shipping. Thanks, Glenn

Thanks David, SOLD

This is a reproduction red ring DUAL-LOC locking gas cap with single GAS key for a 1935-1939 Senior Packard. It is the Packard script B model which has a larger 1 7/8" inlet neck. It's in nice shape. The chrome is very good and the locking mechanism works well. It's been on an indoor shelf for the last few years waiting to be placed on my 1937 Packard Super Eight. Keeping the car, but down-sizing the extra parts collected over the years. Literally a 'turn-key' lock, ready for use. $125.00 with Free Shipping. U.S. only

Thanks for reply. It will stay on the desk!

This hood ornament has been on my desk for over 25 years. Always thought it was a 1930-32 Cadillac V-12 Mascot, but compared with original photos, it isn't. The face and hair are different, hands placed on chest not hair, and base is smaller. There are no visible stamps or markings. The questions are, Marque/Year? Aftermarket? Original versus Reproduction? It looks to be of the era, and it's been too long too remember where it was purchased. Any input is appreciated. Thanks!

I purchased this leather from Bill Hirsch in 2018 to complete a 1930s Packard Super 8 Coupe Roadster with Rumble Seat. Sold car before completion. High quality fine grain leather, very dark blue color, no blemishes, >200 sq ft. $1500 OBO. Swatch available. Will deliver for expenses up to 250 miles. Glenn Hamilton, Dayton, OH

Clean 1938 Super Eight engine disassembled for rebuild. Block and head magnafluxed. Two small heat cracks in valve seats as marked in photo album. Limited wear/standard bore. Cast iron head and aluminum pan are in excellent shape. Crank inspected and polished. Comes complete with everything seen in the photo album. $4000 OBO. Write for more information. Glenn Hamilton, Dayton, OH. glennchamilton46@gmail.com On pallet for pickup, shipping, or delivery. Will deliver for expenses within 200 miles. https://photos.app.goo.gl/Vv5oS1YhfsP5QoYr6

I've been saving this leather since 2016 in anticipation of completing a car (1930s Packard) I'll never finish. Four hides (about 50 sq ft each, 204 sq ft total) of beautifully fine grained dark blue leather purchased from LeBaronBonney by my upholsterer. Always indoors, climate controlled and covered. At $9.50/ft plus shipping and tax, my cost was $2200. Asking $1650 plus shipping. I'll deliver anywhere under 100 miles for free. We could meet. Anyone interested? The photo shows the color as too black. It is dark blue.

I've been saving this leather since 2016 in anticipation of completing a car I'll never finish. Four hides (about 50 sq ft each, 204 sq ft total) of beautifully fine grained dark blue leather purchased from LeBaronBonney by my upholsterer. Always indoors, climate controlled and covered. At $9.50/ft plus shipping and tax, my cost was $2200. Asking $1650 plus shipping. I'll deliver anywhere under 100 miles for free. We could meet. Anyone interested? The photo shows the color as too black. It is dark blue.

My 1956 Jaguar sat for more than 10 years on these tires in a climate controlled garage. Very little use (<2000 miles). Very good condition, excellent tread as you can see. I replaced all while getting the car back on the road. Good for display or rolling stock Jaguar XKs or many other cars using this size. Tires only, no tubes. $250. Will be at Hershey. Space # to purchaser. Thanks!