Adam72

Just an update to you all. I had an auto electrician take a look for me and the issue was the contact in the end of the magneto. The contact had moved and when the key was turned to off wasn’t shorting out the magneto to cut the engine off. He stent 10 minutes and had it all fixed for me. Thanks for all the advice and what to look for. Very much appreciated

Magneto and thanks for the information

Thanks Nige. I will double check that when I have recovered from my surgery 🙂

Thank you. I now have a problem where the car will start but when I turn the key to off nothing happens and the engine keeps running. I have to turn off the vacuum tank to run the engine out of fuel. It’s such a simple switch I can’t work out why it won’t kill the engine. All wires are corrected to the correct rerminals

Good Evening fellow Dodge owners. I have a question. The ignition switch on my 1920 Dodge Brothers works in reverse (off is for starting and on is for turning it off) it’s a pain as when the car is running and driving the ignition key falls out onto the floor. When you turn the engine off the key can’t be removed as it’s in the on position. I hope that all makes sense. I’ve checked the wiring and it all seems in the correct spot. What should I look for to fix this issue. thanks in advance Adam

Thanks Nige, I run Penrith shelsley medium in two of my other cars. Would that be fine in the dodge aswell Adam

Good evening guys. I really hope this isn’t a stupid question. I plan or giving my 1920 a oil change in the next few weeks. What type and grade of oil should I use. thanks in advance Adam

Thanks to you also John. That is very handy to know. I may contact him and see if he can make me a new one Adam

Minibago thank you so very much that is exactly the information I was after. Yes I do still have the original speedo with the square drive. this my old girl

Hi guys after some help please. I have a 1920 Dodge Brothers tourer and wanting to know if some one can please help me out with a speedo cable or the length I need to get one made. located Adelaide South Australia

Hi guys after some help please. I have a 1920 Dodge Brothers tourer and wanting to know if some one can please help me out with a speedo cable or the length I need to get one made. located Adelaide South Australia