BryanC17reo

Any more cast steel early Reo truck hubcaps?

The Vin number is on the engine subframe near the driver's front engine support casting of the block.

Definitely not a Reo truck !

I think it's a 1925 ,bot a look at the rear wheel hub would tell .they had a more robust brake/hub with a small hub cover

Looking for some baker style wheel wedge/bolts in good shape , thanks

Can't believe it there is a Reo god ! I found a nice pair of lights ,and side lamps for it too !

Thanks for your input Wayne !

Can anyone help identify the headlights used on a 12 Reo The fifth? Steel and nickel acetylene.

I'm looking for headlights or headlight parts for my 1912 REO the Fifth project. Any parts ,any condition will be considered.thanks Bryan C

Thanks Mike that's the plan .

Thanks,that was an approach I thought about,the pattern seems to change a little in the area where the back turns to the side in the corner.Again thanks for your input!

A big thank you to all that has shared tips and information in this thread .It's very helpful understanding how to start the learning process !!!!! is there a general ( rule of thumb) on how much more distance between the pattern on the leather verses the backing button holes ? I'm sure the spacing horizontal and vertical are different ratios ?

Very nice job, I hope to gain the experience to do my 12 Reo The fifth soon!

Sorry this link isn't working if interested I could maybe get more information

https://m.facebook.com/marketplace/item/1337931783493045/?ref=search. Not sure if these parts would be of any help 1937 airflow for sale

https://www.then-now-auto.com/antique-auto-parts/

Hi Rob did you ever find a home for this truck ?

Update , I have found Alot of parts I need to restore the REO H truck , still looking for a better cylinder jug and transmission gears/ drums ECT. thanks Bryan

About Then & Now Then & Now Staff Store Hours and Map Contact Us! Then & Now Automotive 447 Washington St Weymouth, Ma 02188 Ph: 781.335.8860 Fax: 781.335.1925

Google antique auto parts cellar ,Then and now auto parts ,they still have them available in their catalog.

Sorry I thought you just needed a bare chassis / frame . I'm in Columbia SC I can send photos later today.

I have one that needs a bit of work but ,is solid ,has a couple plates welded near the center cross member ,and a piece cut out of the front cross member.will send you pictures of your interested.