Patrick C
-
Posts
9 -
Joined
-
Last visited
Patrick C's Achievements
Recent Badges
0
Reputation
-
I live In Westfield , Mass
-
Rebuilt by a professional engine builder. When I picked up the engine he handed me the distributor. I lined up the yellow mark on the flywheel with the center of the opening on the housing where I believe is the line. I set the rotor to #1 plug and dropped in the distributor and then cranked the engine with nothing not even a pop. It has spark and getting gas. I set the points too.
-
It’s not even a 320. If you read the post it’s a straight 8 263 cu. in.
-
Straight 8
-
I did not rebuild the engine. Engine was totally rebuilt. Same cam, crank was taken out and polished. New pistons, rings.main bearings.rod bearings, valves seats and guides. All cylinders have 120 compression except for #1. It has only 30 . But even though it still should fire, right? It does nothing no pop at all. Has spark and gas.
-
Very funny.
-
Help!!!! I need help starting my old 52 Buick after rebuild
-
I need help getting my old Buick straight 8 started after rebuild
-
Need help getting my old 1952 Buick started after rebuild