Jump to content

54vicky

Members
  • Posts

    257
  • Joined

  • Last visited

Everything posted by 54vicky

  1. it is either a problem with the" NEW "master or the rod length not allowing the return of fluid to master as you have pretty well eliminated any other possible problem.remember new does not mean it is perfect.they coin them defective
  2. from the rust I think it is part of the breather assembly (choke)heater used in early smog system the shape looks like early 70s ford here is a picture of what I think it resembles
  3. another of GMs attempts to crush the VW invasion competitor for the Vavagon
  4. that is a 54 ford factory wheel disc not aftermaket
  5. to possibly add to what lump wrote the rib on casting was to hold a sheet metal housing that hot air pipe fit too.it was either a tin tube that ran too the air cleaner it was also a flexible tube on some years.notice the holes they were for rivets to attach the housing
  6. now I see it with my glasses on you are right oh well it at least got a bump😁
  7. unless picture is flipped strange that the hand is upside down.not convinced it is auto turn signal because of hand being upside down
  8. a poor ground will cause the hot cable due to resistance.if nothing else it was fun reading some of the answers.I think your answers were filtered out Rusty as no one noticed your battery comment in the first few posts.
  9. no recent change it started with new looking format will check back
  10. why can I not view past a certain point?.have tried for a few days now get to page 1392 then will not go any further
  11. those look very similar to 50s ford they mounted on the firewall.the pins sticking up were studs for circuit breakers.then again they may be for another thing altogether the clips held glass fuses
  12. I agree with 55 you probably have Mercury not a Ford
  13. not the answer but I am pretty sure that is a baboon not a lion.
  14. the problem with the wd40 suggestion is that it does not play nicely with applying new paint.research before opening a can of worms due to the silicone
  15. early swifter sweeper prototype😁
  16. do not know how I missed this one.but here goes taking some of my grand kids to a cruise night a few years ago
  17. 54vicky

    Rubber Bumper

    they were used by a lot of makes at least up into the 50s if not later.the bolt hole spacing may help
  18. I agree with Matt on the toll thieves that was my first thought.apparently they are going to look into no matter it will bill taxpayers as usual for a rush(read RASH) by our donald to draw attention from real needs
  19. I am pretty sure that is perfect example of down in the weeds
  20. you would love some of the ones up here think Carlings Labbats etc works of deco art at the time
×
×
  • Create New...