Jump to content

32 plym

Members
  • Posts

    35
  • Joined

  • Last visited

Everything posted by 32 plym

  1. I have had a number of 37 & 38 Buicks over the last 40 years and have gathered a large number of parts mostly NOS still in Buick boxes. Since I only have a 1937 Buick 2dr and don't plan on getting another, yet, I am planning to sell some parts. I will try to put a list together and take photos when necessary. I will also send a list to publish in the Torque Tube Club publication. Just keep in mind I am like you guys a Hobbyist not a dealer so I will try to take care of it ASAP. Please feel free to send me your cell number and I will be happy to call you, text or email phots, and am not very technical but I will try to upload some pics here too. Just a few parts to name I have some used sets front fenders , one NOS rear 37 fender Not gas tank if I remember its 37 and many mechanical parts NOS AC gauges for 37 and 38, Delco vacuum starte switches 37&38. front end parts , brake, wiper transmissions, all trans gears ,torque ball trunk hinges, door handles,, starter solenoids (mostly NOS) many used generators and starters, center hood strips... Any way during these day my plan is to make an accurate list. Hope this finds everyone well and safe. I will try to check this site daily so again feel free to send your cell and I will send you mine Thanks George
  2. John, by any chance do you still have the headlight lenses, Thanks george
  3. Good Morning, I didnt get a chance to see you at Hershey, can you send me your cell number so I can call you. thanks George
  4. additional picutres below
  5. Members 0 30 posts Report post Posted 7 minutes ago I have 5 Packard wire wheel 1932- 1936 3 have been sandblasted 2 have not. The wheel are very straight and in good condition$400. for all, at his time pick-up only Long Island NY. I tried to attach the photo of all 5 the site wont allow I could attach on another email. If possible email me if interested hannag7525@gmail.com as I don't check this site daily or call/text 917-621-7450 Members 0 30 posts Report post Posted 7 minutes ago I have 5 Packard wire wheel 1932- 1936 3 have been sandblasted 2 have not. The wheel are very straight and in good condition$400. for all, at his time pick-up only Long Island NY. I tried to attach the photo of all 5 the site wont allow I could attach on another email. If possible email me if interested hannag7525@gmail.com as I don't check this site daily or call/text 917-621-7450
  6. I have 5 Packard wire wheel 1932- 1936 3 have been sandblasted 2 have not. The wheel are very straight and in good condition$400. for all, at his time pick-up only Long Island NY. I tried to attach the photo of all 5 the site wont allow I could attach on another email. If possible email me if interested hannag7525@gmail.com as I don't check this site daily or call/text 917-621-7450 additional pictures below
  7. I have 5 Packard wire wheel 1932- 1936 3 have been sandblasted 2 have not. The wheel are very straight and in good condition$400. for all, at his time pick-up only Long Island NY. I tried to attach the photo of all 5 the site wont allow I could attach on another email. If possible email me if interested hannag7525@gmail.com as I don't check this site daily or call/text 917-621-7450
  8. Hello, checking is the car still for sale, Please text me 917-621-7450 Thanks George
  9. Hello not sure if still available ,checking if it fits 32 Ply PB
  10. Good Morning , sure it sounds good i can stop on the way back to NY, Long island, let me know.
  11. Good Morning I think I will my cell is 917-621-7450 interested in the hood.
  12. Good Morning will you be going to Hershey? George
  13. Good Morning do you still have the posts available? If you have time you can call or text me , George 917-621-7450 Thanks
  14. Hello I would be happy to pick up in Hershey, please text or call me me if you can 917-621-7450
  15. 1932 Chrysler CP parts 32 plym posted a topic in Chrysler Products - Buy/Sell I recently purchased a large number of parts for my1932plymouth and with them I have a fair amount of pars for a1932 CP straight 8 which I don't have. The parts include a complete engine, heads, manifolds(which appear to be NOS) . Rather then wait until Hershey and put them on a table I am just...
  16. Hello I have an EX-22 for you and i also have a complete rebuilt engine which i bought for mine which i never used if interested i will gladly give you a good price, Thanks George my email is hannag7525@gmail.com cell 917-621-7450 Thanks
  17. Hello, Newbie where are you located in Florida, I am in Palm Beach Gardens, Thanks
  18. I recently purchased a large number of parts for my 1932 plymouth and with them I have a fair amount of pars for a 1932 CP straight 8 which I don't have. The parts include a complete engine, heads, manifolds(which appear to be NOS) . Rather then wait until Hershey and put them on a table I am just checking if anyone has any interest in the parts. The engine looks very clean, I was told by the family it runs well and at one time was used as the demo in a Chrysler dealership. Thats what I was told. Please feel free to email me George H my email is hannag7525@gmail.com or my cell is 917-621-7450 Thanks
  19. Jeff, can you let me know if the car is still available my cell is 917-621-7450 Thanks George
  20. Hello Ron, I am kind of late joining this chat I have 2 PBs phaeton and convertible coupe with many many extra parts and several engines fell free to cell 917-621-7450 Thanks George I hope this gets to you
  21. Hope this message gets to you I have 4 , I think on e of them might be what you are looking for. I will be home to take photos Saturday. My cell is 917-621-7450 Thanks George
  22. Ron I am not that fluent in how to respond I have a couple of spare engines, feel free to call 917-621-7450, Thanks George
×
×
  • Create New...