RodgerWilson
-
Posts
103 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by RodgerWilson
-
-
Pic’s of the back/movements. Also my 1920 Elgin Touring Car. Thanks.
-
Here’s the two Elgin dash clocks that I have. The one with the white face is a 1926 and the one with the black face is a 1927 (dates based on elginnumbers.com website). Both run. To recover my money I would take $125 for the pair. Let me know if you’re interested. I could only attach 3 pictures due to the size limits. I will post again with pictures of the back with the covers removed. Thanks.
-
Re-listing…. Thanks.
-
fozz71…. Where was this car originally listed? I am in the general area of Oswego and I haven’t seen this car out and about. I did send a text to the number provided, but I haven’t heard back from them yet. Thanks.
-
I have two Elgin long stem dash clocks, which both work. I am traveling and will touch base with you after the 1st of the year. I purchased both of them off of eBay because I own a 1920 Elgin automobile. If I recall correctly, I think the one clock is a ‘26 and the other a ‘28. Thanks.
-
I wasn’t thinking…. I should have included the measurements when I posted it. It is 19 1/8 tall and 19 5/8 wide. I got to believe that it is early 20’s given the last patented date says June 8, 1920 with others pending. I got this when I had purchased a 21 REO.
I would consider a trade for another interesting item from the early 20’s. Thanks.
-
1
-
-
FOR SALE a Winterfront to place on your radiator for winter driving. I don’t know of anyone really driving their cars in the dead of winter, but if you do this looks much better than a piece of cardboard on your radiator. I personally don’t like the look of it on the front of a car, but someone else may like it (to each his own). $100 plus the cost of shipping. I may consider a trade for another interesting piece. Thanks.
-
1
-
-
No longer needed. Tom (Old Buicks 2) had just what I needed. Thanks Tom.
-
2
-
-
The metal rods/post are for the side curtains. The window in the top at the rear should be glass.
-
1
-
2
-
-
I’m always looking for late teens through about 25 Touring cars.
-
I am looking for points for an engine made by Falls Motor Corporation of Sheboygan Falls WI. Falls made motors for several automotive manufacturers. My specific need is for a ‘20 Elgin Touring Car. I’m attaching a few pictures of the points that I am looking for. The part that seems to be different from anything that I can find online is the way the spring connects. There are two post, one for the pivot point and one for the spring to clip onto. Thanks for any help.
-
Chuck,
Can you measure the mounting hole (center to center) and the width of the mounting plate. I may have a use for it. Thanks.
-
Go to Restoration Supply website and compare to their generic which you can add a logo too. I would think the style that you have would be more desirable. Price them to help a fellow enthusiast out. Thanks.
-
1
-
-
I am the previous owner of this car. I sold it to pursue a 24 REO Touring that my dad owned when I was in Junior High and High School. I would be happy to answer any questions about this car. Obviously I have no interest in sale of this car (anymore). Thanks.
-
2
-
1
-
-
-
I had a 22 Overland model 4 (pictured below). Wooden spokes is correct for the year. The WOKR is a great club and can be helpful. If you inquire on the club website you will most likely be ask to join before anyone shares much information. Best of luck.
-
Can you send me some pictures? wilson1rodger@comcast.net. Thanks.
-
Try Restoration Supply out of California. I got one for an Elgin through them. Good luck.
-
1
-
-
I have a set of 746 (L & R) that I believe are for a roadster (less top bows). Just wanted to make sure that your numbers weren’t transposed. Thanks.
-
Do you have anything that looks like the attached picture? It needs for the locking teeth to attach to the transmission tower as well as the lever pivoting on the transmission tower. I am also looking for the tower as well. Thanks.
-
Not finding a lot time to work on it, so not any change to report. Thanks.
-
Yes…. That’s who I was referring to. Thanks and good luck.
-
1
-
-
Have you tried the REO club? I know of a guy that lives near St. Louis MO that has a similar truck that he has brought to some REO meets.
-
I saw one on eBay. You may try doing a search there. Good luck.
NOS Model T Era Mirror Bracket
in Parts For Sale
Posted
Spacing of holes and width of mounting plate?