Jump to content

Don Tomaso

Members
  • Content Count

    22
  • Joined

  • Last visited

Everything posted by Don Tomaso

  1. These guys can fix whatever you need: https://www.pushrods.net/
  2. I bougth to my 49 roadmaster from this firm i sweden: https://baautoparts.com/ The can produce exhaustsystem to all american cars from 1941 and forward. The system is made in Finland
  3. Hi Here are wiring diagram to a 49 and they have the same starter (42-50 are the same)
  4. A 49 sedanet don't have a spare tire vell. Spare tire is lying down on the trunk floor( not enogh space to stand up)
  5. Try looking in sweden too, I sold a 48 248 with manual gearbox in february. Straight eights are for sale now and then i Sweden to.
  6. I'm in a desperate need of the spring retainer, spring and seal cap to my 49. I have a new seal. I hope that someone here have the parts i need, can't put the engine and dynaflow back in the car before I got thes small parts.
  7. And the Roadmaster dynaflow total oil capacity are 10 quarts, the super dynaflow are 8,5 quarts.
  8. This is how you do it, hydraulic valvelifters don't have a valvelash Copied from the manual: a . Initial Adjustment of Hydraulic Valv~ Lifters The initial adjustment of any hydraulic valve lifter must be made only when the lifter is on the camshaft base circle (off the cam) . 1. Crank engine over slowl y until distributor rotor indicates that affected cylinder is in fir- ing position, which places both lifters of this cylinder on the camshaft base circle (off the cam) , so that either lifter may be adjusted. 2. Turn adjusting ball stud as required
  9. Not correct, you have hydralic lifters. Go in here http://oldcarmanualproject.com/manuals/Buick/1948-49/index.htm and download the shop manual then you know how to adjust your valves..
  10. I still need a nice "Left Door latch to a 49 Roadmaster sedanet"?
  11. Finally I have found a god 320 with dynaflow so now I can build her back. The 248 and manual gearbox are going out and a 320 with dynaflow are going in. New engine New gearbox My car Old engine
  12. I need all the pushrods and hydraulic lifters to my 320. Since I don't have a single one I don't know the measurements to order new ones from Smith brothers.
  13. Left Door latch to a 49 Roadmaster sedanet?
  14. Hi I need the left front door lock mechanism. (same on 48-49 Buick, 48-49 Cadillac and 49 Olds 98). I also need tail light pigtail with bracket. (same on 49 Roadmaster and Special).
  15. There is Dynaflow skript on the steringwheel and trunk lid to, so i also guess on a dealer rebuild.
  16. Hi, not a europe car, imported from US this summer.
  17. Thank you, then my car must have been built with dynaflow and then converted to manual. (maybe by the dealer).
  18. Thank's, You are right, I live in the south of Sweden about 40 Km southwest of the city Växjö.
  19. Hi On the body tag I have the letters K and M. Anyone that know what they mean. All the other I know what it means. My car has a manual transmission with all the right parts so i wonder if it's maybe a special order or maybe modified by the dealer? Every book says that all Roadmasters has the dynaflow transmission but not mine. Regards Thomas
×
×
  • Create New...