Patrick J Reeve

Good morning. I'd be interested in buying this from you. Patrick 315-663-1569

Good evening. I did get your message and I did respond but I'm sorry that you didn't get it. I'm not sure why it didn't go thru. Your check did go out last weekend. Thanks for sending them out without payment. That was very nice of you. Thank you, Patrick

Good afternoon. I would like to buy these from you. Thank you, Patrick 315-663-1569

Good evening Auburn lovers. We were wondering if any one out has any info on replacing the drive shaft u joints (especially the rear one) on a 31 8-98. Does any one have a conversion for a modern type joint? Any help would be appreciated. Thank you, Patrick 315-663-1569

Good afternoon. We are interested in the studebaker hub caps if they are still avaiable. Thank you, Patrick 315-663-1569

Hi I would take the tanks if still available; call me at 315-6631569. Thanks Patrick

Hi-Call me to work out payment and shipping. I live near Syracuse' Thanks Patrick 315-6631569

Good morning. My name is Patrick Reeve and my father and son and I run a machine shop that we specialize in early engines and drive lines. If any one needs them, a couple of years ago we made a couple sets of conn. rods to replace the hinged rods that are of H beam style and ARP rod bolts, 4140 annealed and stressed relieved material . We made them for insert type bearings or we can Babbitt them also. They are for the 1.625 size rod journal crank pin diameter( I believe the earlier style crank). If any one needs them, just let me know. Thank you, Patrick 315-663-1569 cell or 315-655-8812 shop

I would like to buy the one from you that is made in buffalo. That isn't far from me. Thank you, Patrick 315-663-1569

More pictures

It is for a peerless, but it just a generic wiper motor. I have seen them on many applications such as franklin, packard etc. I will try to get a picture soon Pattick

Good morning. We are in need of a wiper motor. The way it mounts is with two tabs that are 4.75 center to center distance and one stem that the arm mounts to. Thank you, Patrick 315-663-1569 Not sure it it helps but it is for a 1929

Good morning. I will take it please. Let me know how to proceed. Thank you, Patrick 315-663-1569

Hi Matt- Could you load the 56 motor and trans on a pellet and on a UPS truck? How much for both? Thanks Patrick 315-663-1569

Some parts that we need for an 8-cylinder car, some may be interchangeable with a 6-cylinder car: - thermostat assembly - front lower seat cushion - front window crank - front window gear assembly - wiper motor - hand throttle gear linkage at bottom of steering column - rear fender chrome strips - high-ratio rear end assembly Any help would be appreciated, Thank You Patrick Reeve susankreeve@yahoo.com (315)663-1569

We could use the sending unit of a 1928 Buick Master gas tank, also the lady goddess radiator cap. Any help would be appreciated. Thank You Patrick Reeve susankreeve@yahoo.com (315)-663-1569

Wanted: Delco ignition/Light Switch The specific switch came out of a 1925 Nash, but other manufacturers have used this same design. I am also interested in some other parts. If anyone has a gas cap, or any information on what people have used for a front windshield seal. I am also a carburetor heat control knob/handle. Any thing parts or information you have will be a great help. Thank You Patrick Reeve susankreeve@yahoo.com (315)-663-1569

Wanted: Delco Ignition/Light Switch The part I want is off on a 1925 Nash, but I know other manufacturers use the same switch. Any help would be appreciated. Patrick Reeve susankreeve@yahoo.com (315)-663-1569

Syracuse New York, my number is (315)-663-1569

Sorry for the poor representation, the hood latch is not an issue. We had the hood open for a service check and my son forgot to close it.

61,000 original miles loaded A.C. works great new tires, brakes and exhaust new headliner and updated filler panels very rare color combination very nice driver $4300

61,000 original miles loaded A.C. works great new tires, brakes and exhaust new headliner and updated filler panels very rare color combination very nice driver $4300

This is Patrick Reeve. I am very interested in your engine. If you could please call me or if I could get your number I would appreciate it. Thank you and no problems with the phone number but Thanks for looking out for me. Patrick 315-663-1569 cell or 315-665-8812 shop

Hi - I could use the front motor frame member; is yours good? Thanks Pat

Hi -Where is the car; more pictures; any offers; what price are you looking for? Thanks Patrick