Jump to content


  • Content Count

  • Joined

  • Last visited

Everything posted by cxgvd

  1. I received my issue yesterday in Southern Ontario, Canada, a six hour drive from St Joseph, Mi. Good going Canada Post. Thanks and stay well, Gary
  2. I, too, am from Ontario and recognize the new issue license plates and am amazed how hot rodders can pass the required safety inspection? At least you did not apply to use Antique Plates as many of you hot rodders do. Gary
  3. Bev and I are hosting a Snapper's week long tour in Chatham during the first week of August, rescheduled from last summer. We were in lockdown over the holidays and I tried to think of antique auto drives which would entertain my friends, I had an idea to host an optional weekend in Leamington. Bev and I enjoy Point Pelee National Park anytime but especially from the seat of our open air Buick. Here are some photos I snapped last summer to illustrate how beautiful the Park is, our guests would be getting seven days of tours, always give a bit more than you promised. Stay well in
  4. My 1939 Buick has old runningboards, some voids and cracks, and they are not reproduced for my model. I cleaned them and used a paint brush to spread multiple coats of a rubber liquid I bought at a local building store. I poured the rubber into the voids until the area was level with the existing mat. The job is shiny and serviceable. I think of it as good, old mats; better, voids filled and shiny black; and best, new vulcanized, manufactured and professional. Good luck with your Hupp. Gary
  5. John: I hit the like button for the creative way you dug the wagon out and left the snow on the roof. It must have been a heavy wet snow to seemingly weigh the car down or is it full of camping gear? In southern Ontario we were part of the same storm but on the western edge and received a trace amount, thanks for taking the hit for us. Interesting pictures. Stay well, Gary
  6. The title of this weblog concerns driving Snapper era cars, part of driving cars which are a hundred years old means I have to have a vehicle heavy enough to pull our 6000 pound trailer. Unless, of coarse, I only want to drive my cars locally. Since Bev and I are retired we have had one modern car, a pick up truck, which is great for trips to the lumber yards and trailer hauling, not so much for the Walmart parking lot. My truck is now 10 years old and 95,000 miles, I should swap it for a new/newer one except it is running perfectly and I like it. My solution to the issue was to
  7. Doug: You at least have an offer, sometimes I say" life is good but it is not that good" maybe get the buyer to accept a counter offer? Sound as if you are far apart on price but maybe the buyer doesn't realize what antiques cost and if you tell him/her he will appreciate the Statesman more. Good luck with the car, sorry your city is going into lock down. I renewed my AACA membership by phone yesterday and Pennsylvania is re entering lockdown too. Regards, Gary
  8. Looks good Doug and son. I performed the same job on my 2010 Toyota truck with 152,000 Kms two weeks ago. I used premium parts and changed the calipers as well. Easy and the truck stops better now than when it was new. Swapping out a (w)holy muffler this afternoon. Regards, Gary
  9. This morning, Nov 25th, the buzz on the BrassBuicks website concerned fitting a new Zenith model 267 carburetor to replace the Marvel used in the 1915 C25. My C25 is fitted with a rebuilt Marvel but I have not driven the car enough to believe the Marvel will be durable, reliable and safe. I contacted the recommended Daytona Parts Company in Florida and ordered a new Zenith model 267 to use as the first line carb and keep the Marvel for shows and judging. For the Snapper's Summer Tour, Bev and I chose the first week in August. We are collecting names for our Pre '16 party in Chat
  10. I have not had much to post lately, working on the home and thinking of winter work. Under the general forums I enjoyed Chris Bamford's thread on driving his Model T Ford touring in an early snowfall. Well, the weather in Southern Ontario is absolutely perfect, clear, sun, slight breeze and 20C (70F), we had to get the old Buick out for a drive and I saw a fall picture opportunity on our friend's farm I wanted to snap. Following the photo session we took our friends for a long drive around the country block and it was their anniversary so this was our gift to them. Bev and I are
  11. Lovely weather, calm, sun and 60F, we took the opportunity to drive our 1939 Century sedan for a 20 mile route. Stopped at the orchards for a bushel of apples, umm good eating. I am planning to renew our woodgrain parts this winter, some glass is delaminating and will be replaced and a vent window winder is stripped. I think I am disciplined enough to hold the line and not become a total restoration. Regards, Gary
  12. I was asked by the restorer of this 1923 Gray Dort to photograph the car and duplicate an original factory picture. Following the photo shoot, we passed the home of the Gray family, the people who built the car in Chatham, On and wheeled onto their driveway and posed in front of their coach house. I was thrilled with the assignment. It even got better when I was allowed to drive the Gray Dort back to Blenheim. Being a six cylinder the ride was smooth at 35 MPH and would cruise at 45. Soon the car will be leaving for the west, it will leave a big hole in our lives, being a Chath
  13. I have viewed every photo in this thread though I have not had anything to contribute, until now. My friend restored a 1923 Gray Dort and he had an original photograph of the same make and model taken near the Gray Dort factory in Chatham, On. This afternoon we drove the car about 40 miles for the first trip to the location where the original photo was taken nearly a hundred years ago. Regards, Gary
  14. Old car bubble buddies ramble on. A few things we learned to do with my circle of early car guys is to have a weekend visit once a month, plenty of social distancing comradery and keep the daily mileage down to 50 to 60 miles per day to encourage the members to bring their small, single and two cylinder cars. Here is a sample group of photos from near perfect summer like weather of our activities. Bev and I hosted the coffee stop this morning and when we were leaving one car would not start, dead battery. Usually the unfortunates would climb into another's back seat, this time e
  15. Friday, day one Bev and I are hosting a small group of pre '16 car drivers this weekend which has swelled to a dozen cars. What a great collection '04 Oldsmobile, '04 Pope Hartford, '06 Cadillac, '07 Darracq, '09 Oakland, '11 Oldsmobile, '12 Cadillac, '13 White and Buick, '15 Gray Dort and a couple of Fords. On the home repair front the long thin battery from my 1939 Buick had to be replaced after five years. The battery would charge and read the correct 6.5V but would be dead after 15 seconds of cranking the engine. The 93EH battery is a stock item at my favourite shop and cost
  16. On another website I follow called BrassBuicks a fellow wrote in describing a repair he made for a dragging clutch which caused me to check my linkages and clean everything up. Here are the photos of a neat piece, a cast aluminum clutch case cover, the clutch and transmission cases showing the linkages and finally the front floor back in place. I am a believer in fixing the car at home and hopefully drive the Buick in my old car bubble without incident. I'd like to promote the idea Buick built good cars, while not mentioning the hours of maintenance. Stay well, Gary
  17. A black 1939 Buick Century sedan with side mounted spare tires and wide running boards parked on a pier with Lake Erie as a backdrop makes for an attractive pre war sedan photo. Regards, Gary
  18. Hello Doug; Thanks for posting the photos of your dad's Overland. I think it is a wonderful car, I can think of the time you would have tinkering with it, ice cream runs, cruise nights, giving rides to neighbours and enjoying your family's history. Life is fine at 35 MPH. Regards, Gary
  19. "Glowing Gaseous Globes" uses this snap of my 1913 for the banner photo for the web site BrassBuicks and it's nearly five hundred members. Regards, Gary
  20. I've read all of the posts and I would offer some ideas and ask some questions about Classic Cars and the hobby. I am interested in Brass Era cars and the Horseless Carriage club has maintained the pre 1916 cut off date for national tours and I don't know for sure but they seem to be doing well as a club. When I owned Chevrolets the Vintage Chevrolet Club had tours for the early cars, four cyl up to 1928, early six cyl up to 1954 and those events were popular. As for the CCCA cars I have friends who have them and they are beautiful, but I rarely see them on the road. A few years
  21. My wife and I are members of an old car bubble which meets one weekend a month for brass era touring. We have seven members, somehow our next tour at the end of September was announced in our Southern Ontario HCCA regional newsletter. It's a snafu and our Chatham meet is not open to the public. I dread the ringing telephone or email check because I have to turn my other friends away. Bev and I have set up a drive with picnic lunches and a museum which is closed will have someone to greet us and give a talk and stroll while practicing social distancing. These are difficult times
  22. My '13 Buick repair is back together and my '15 McLaughlin starter/generator was acting up. I cleaned the battery terminals on the '15 and I added a heavy braided cable from the starter/generator to one of the engine bolts and that seemed to get the starter churning. My wife and I gave the McLaughlin a major washing so I can polish the paint. Waiting on upholstery to finish the restoration. I gave Bev a lesson so she could drive the car and she handled the event well. A variety of detail photos and a lady driver. Stay well, Gary
  23. Well, well, well, from the you're never too old to learn file. I parked our 1915 McLaughlin C25 touring car and we gave it a thorough wash in preparing to give the paint a polishing. After we finished and the car was drying in the gentle breeze my Mrs said would like to learn how to drive the car. I gave her a lesson, mostly the backward gear selection, she started the car, set the spark advance until the engine was purring and drove the touring car slowly into the outbuilding garage next door. Couldn't be more pleased she shares our hobby. Stay well, Gary
  24. Happy use of an antique car Larry and Joyce. I have visited the Piquette factory museum, time has not looked favourably on that part of downtown Detroit. I have a friend who often declares you are welcomed and can go anywhere in a brass era car, as you have shown. BTW, here is my photo when our Buick was invited to a wedding. I know you will have a great time at the Gilmore Pre War show next month, Bev and I will miss it dearly this year because the US/Canada border remains closed except for essential service. Thanks again, Gary
  25. Update my 1913 model 31 rear axle grease leak today. The shop who relined my 1915 McLaughlin brakes does not answer the telephone and though their website is up the shop seems closed. I got another name of another friction shop about three hours away. Kent Fabricators is the name of a large shop in Blenheim who I believe can repair anything, farm equipment, elevators and antique cars. I showed the broken sleeve to a fellow and asked them to source a replacement. He said it could be TIG welded because I needed a temporary repair so I could use the car for a few hundred miles before winter.
  • Create New...