[wtb spring shackles for 1928 plymouth model Q.]

8 hours ago, Rodney Koehn said:

I need 1 front and 1 rear. I believe 29 and 30 are the same, probably some chryslers too.

Ebay , Search Tryon shackles .

[DB 27 Fast Four horn button]

[Chandler gap between wood and metal band]

Find a wheel shop and have this band removed and shrunk for reinstall . Or have new . Easy job for them and won't be bad ,cost wise . Location maybe problem if no Amish or Mennonites in your area .

[1931 Chrysler CM-6 - light switch sticking]

Sound like something is misaligned or spring pushed to tight at bottom . Remove switch from tube make sure there not binding in column . Pics would help .

[Gold plating]

DYI  , Texas Platters Supply Co . Sold kits to do silver , gold ,copper ,nickle . 

[distributor drive needed for 1928 plymouth model Q]

[Rust in the gas tank]

Try plastic tubing  brass liners for 1/4" compression fittings ,used in water filters system etc. I'v used for various things including liners of carb linkage .

 Can be bought in separate packages than connectors as a plastic ferrule and the liner.

 

[Dodge truck from Denmark]

May not have been made in England , LHD . Pic of tags on it and side view will help .

[1929 Chrysler Series 65 Replacement Thermostat?]

Without hole very hard to fill cooling system without burping housing . Air lock can cause steam be fore fluid can get to stat element that opens ,too .

[Information needed -Dodge Truck.]

Sucked right in here Dave LOL . You can just hook up to a good engine and try . It takes a special tester , that are antiques themself ,to properly test . I believe a few year ago some one was doing it for free  . You may find in your search , thinking Edinmass. Most and myself hide new oil-less coil under dash and remove key and coil section from bezel replace with simply 3/4" two wire key on dyi bracket . And works better, looks perfect unless you crawl under dash . Totally reverse able ,no mods to original equipment .

[Rust in the gas tank]

Use Marine Sta-bile . has anti rust corrosive property . Mine with non-E is five years rust free.

[1932 Dodge shop manual]

Is any of it descriptive of work procedure .  Those pics are typical of whats in info owners book and Master parts book .

[Chrysler running board moulding]

Must contact thur Facebook  L&L Antique Auto Trim . They have new phone number .

[1930's Mopar connecting rod PA or UT]

Same rods used in PA and PB can also end in 45 . BTT.

[1926 Chrysler Distributor Drive]

Jay had a few at Hershey this year .

[What is this planetary brake system on 1912 Metz ? Mutiple-disk brake system.]

Thanks for all info and responses . We have car running and brakes do slow down . Lube was only thing unsure of . That is answered now . With grease per manual .

[1915 water pump gland packing.]

Talk to local old plumber or plumbing store . Most older hot water circulaters used similar .

[Dodge Bros truck]

Does not that description make the above install upside down ?  Bolt should be going down and springs on bottom then nut .

  As six cylinder where only one using and  mostly on larger trucks , few are left to see .

[Dodge Bros truck]

MPB T9-21 Front engine support spring 514428  qty 2 .😉

[Dodge Bros truck]

They do list them in MPB for that model and many others .

[Dodge Bros truck]

Looks like maybe one spring goes under bottom of bracket , base on before pic .

[Dodge Bros truck]

Stakeside is that the like single or double beadboard used in wainscoting ? Is beautiful . I guess is some kind of tongue and groove edge to keep together . 

[PA door]

keiser is there a number for that door . I'll check if trucks used .

[1916 Metz Huckster?]

Serial number for model 25 is in this thread .

 

[1932 Dodge shop manual]

 Great to hear . Could you show a couple pages as example ?