48windsor14

Members
  • Content Count

    10
  • Joined

  • Last visited

Community Reputation

10 Good

About 48windsor14

  • Rank
    Junior Member
  • Birthday 02/02/1996
  1. Hello I was wondering if anyone knows if I can use Monroe 31000 shocks for the rear and Monroe 5752 for the front? Will these work and if not does anyone know where I can get some. Thanks.
  2. Hello I was wondering if anyone knows what position the wires belong on the turn signal flasher? Also what color wires go on the flasher? Thanks in advanced.
  3. Would this be it and how do i remove it?
  4. Hello I was wondering if anyone knows how to remove the lock cylinder from the doors. I need to remove them in order to get some keys made for them. Thank you.
  5. Hello my 48 Windsor needs more oil in the rear end. I was just wondering if anyone could tell me how to refill it and what type of gear oil I should use. Thanks in advance.
  6. Hello, I have recently gotten my Chrysler to the point where I can now drive it but have a question about the brakes. It is a 1948 Windsor, I bled the brakes and made sure that every brake line was tight and not leaking any fluid. The wheel cylinders are all new as well as the master cylinder, I was just wondering if you are supposed to pump on the pedal to get the car to stop. When I drove it I had to pump the pedal a couple of times because it would not stop even after pumping the pedal the car did not completely stop. I just wanted to know if maybe I should bleed the brakes again or adjust the brake shoes or maybe if this is normal. I would really appreciate any help as this is my first car of this year and know almost nothing about these brakes. Thanks in advance.
  7. Hello I have two good condition rear drum brakes for a 49 Windsor. Looking to sell them or possibly trade for two rear drum brakes for a 1948 Windsor. They did not fit on my Windsor which is why i am selling them. Make me an offer or possibly a trade thanks.
  8. Hello I was wondering if anyone knows where I could find some lug bolts for my Chrysler. I have tried roberts motorparts and bernbaum but they do not have any they are the left hand thread and right hand thread bolts. If anyone has any information I would really appreciate it thank you.
  9. Hello I was wondering if anyone could help me find a way to remove my rear brake drum. I bought a drum puller and got the driver side brake drum out. However the passenger side brake drum did not come out. The lug nuts got stripped and I can't figure out how to remove it. Also if I were to cut it with a grinder would it come out. And does anyone know if any brake drum can be used to replace the rear one. Thanks in advanced.