rjp

Looking for a pair of good top bow saddles. Thanks.

Found the problem!!!!! The nipple that goes down in the oil pump broke or cracked, I can fix. Thanks Roger

Got back to work on my 23 stude touring. I put a new nos oil gauge in several months .ago. Started it and ran great and oil pressure was it was suppose to be. I started again just days ago and have a full stream of oil coming out on the shop floor. I have not looked any further. Is there a bipass or soft p[lug ? Like i said I did not look and it did not leak at all earlier. Thanks Roger It is not the gauge or plumbing to it.

Thanks abunch ,I think I can come up with some thing or build something. Ill have to look around for some nice bow saddles. Thanks again

Your correct of coarse, Not good at this. Yes a 1923 Special 6 touring. What is behind the seat cushion that that holds the saddle. There is nothing on mine except the hole in the wood frame. I did not know if it should have a stud or a sleeve. How it was fasten to the frame. What style of saddle did the 23 special touring have? Thanks, if its like the top one in the picture, I never have seen one. Is that what Iam looking for also. I think the only ones I have seen is like the bottom left. Any info helps. Thanks

I have a 1923 Studebaker touring. Can some one tell me about the bow supports? I have the holes in the body for the shaft to come out for the saddle brackets. Can some one tell me what the piece looks like under the upholstery what do I need build. Thanks Any thing will help.

Can some tell me or have a picture of the top bow stud that goes in the body of the car that you put the saddle on. how is it attached on the inside of the car, or would any one have a pair from a parts car? Thanks This would be for 1923 stude if year makes a difference. Roger

Sounds good

WTB Looking for a 0 to 5 lbs gauge with a black face and measure's about 2inchies in dai. Thanks It does go to a 23 Studebaker Thanks again Roger

Looking for a low pressure oil gauge 0 to 5 lbs. that has a black face. It would be about 2 inches in dia. Thanks It is out of my 1923 special 6 thanks again Roger

Thanks Ill give him a try. Thanks again.

Looking for a 0 to 5 lbs oil gauge for a 1923 studebaker with the black back ground it measures about 2 inches in dia.. Or does any one of a good repair place? Thanks

I now have another problem. Would any one have a 0 to 5 lb oil gauge for a 23. it does measure about 2 inches. mine leaks in side. Roger

Ther is one rebuilt in Penelton Org. a very good friend of mine.

Pulled the pump and the key on the end that goes into the cam was broke off. I had a new shaft made and back together. Got oil up to the gauge now but still no pressure on the gauge. I will work on gauge maybe tomorrow. I feel good about finding one problem so far. Roger

Might have i covered ,Thanks Foung a good gun smith that working on it. Thanks again Roger

I have a 1923 Studebaker Special 6 Touring 5 pass. Looking for a engine oil pump. 1925 or earlier. The key has twisted off of mine . Mine did have steel gears. Gears or whole pump. Or info on where to go. Thanks Dont feel bad alot of people have told me where to go. Thanks for any help. Roger

I took the screen out and was not to bad on the outside, but the inside was about half full of what looked like bees wax, or hard jelly looking gunk. I did put alot of oil down the oil gauge hole and it never filled up. I dont believe there is a prime plug that I can get to. Could that be a up graded pump, or wrong? The only other plug with a screw driver slot is on the side behind the cast webbing for the motor mount. Should I go ahead and pull the pump? The pump is painted black, not like the block. What do you think now? Thanks Roger

Could one have mounted the pump wrong? there in no way to get to the primer plug? Can one rotate the pump one set of holes or can it only go one way? Thanks

Ok, thanks Ill try that before I get carried away Roger

Ok, thank you very much. Roger

I have not done any thing yet! I have no oil pressuer, I took the line off going to the gauge and nothing. I took the pipe off going into the pump from the gauge and primed it with oil and still nothing. Can I( if needed) put a new oil pump on or gears like 28 or 29. Thanks Roger

Nice!! too bad for me that it is that far away

I think so does it have STOP in the upper lens?

Ok, thanks, now I just have to find them. Any suggestions? Thanks again Roger