Jump to content

devildog93

Members
  • Content Count

    189
  • Joined

  • Last visited

Community Reputation

15 Good

About devildog93

  • Rank
    Senior Member
  • Birthday 09/04/1970

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. I second flaring your own lines. After all, it is a good skill to have and you know what you have got when you are done. You can practice with a scrap piece without too much of a problem and flaring tools are not all that expensive. If you mess with old cars the chances of running into one that needs a brake line splice and flare would be pretty high i would think, so being able to do that quickly instead of waiting on proper length systems to install might do the trick in a pinch.
  2. I like listening to Lou from car fix. I could do without Jared though.
  3. Good looking stuff, especially the motor. I really enjoy seeing more 430s.
  4. Ed i wasn't talking about what was done with 30s and 40s cars. You aren't setting those back in time and making them less functional. I am surely not bagging on the old guys for doing what they did back in the day or i wouldn't have the opportunity to play with some of the cars or engines i like. What i do not like is people doing something just for the sake of being different even if it means cutting off a finger. I don't want to hate on the fat and furious guys for making a buck, but i would have left that build off the show if it were me. I think i am probably not the only guy who would hav
  5. I realize i am biased as hell, but i hate all gassers, not just this one. I think they are a functional disgrace and just retarded examples of anti-engineering. Who the hell says hey, lets take this car and drop it back 40 years in suspension. This isn't a car any more, it's a crappy version of a dragster...and not very fast at that. How much did it cost them to go into the 11s? It bugs the crap out of me that i know we could do it for the same money, yet retain good braking, handling, and driveability without going full retard. Gassers are like guys who just do curls and say they work out. Go
  6. I'm not a paint and body guy by any measure, but have worked with one in the shop for a year or two. I can understand how hard it is for them to give an estimate until it is taken all the way down to metal. I know by my project that there is always more than you think and in the worst spots. Body work is definitely the time killer of my project. I am a mechanic by trade, but my project has me competing with my mechanic tools with body tools. I had to buy a separate top and bottom box for just the body tools i am using. I give it up to the guys who do it for a living. I can see there is an art
  7. Any time someone brings a car back from the dead they deserve a ton of respect. Now the next time the transmission needs it you can do a rebuild and check off every box Congrats and i hope you get to enjoy it for a very long time.
  8. Interesting. My hole in the rocker panels looked nothing like that. I had a circular hole that was plugged with a rubber boot. It is about the size of a quarter. Never mind, that hole is in the rear quarters on the inside.
  9. Found this while digging around today looking for info. on boosted applications for nailheads, seeing what others have done. I was kind of surprised to see the factory had made a turbo boosted 425. http://www.macsmotorcitygarage.com/2016/03/03/secrets-of-the-buick-nailhead-v8/ I am sure people have improved on it or modified things from there, but it interesting to see the different directions even the factory could have gone.
  10. I really think when it comes to riveras you are better off doing it yourself if you have the time, don't mind acquiring tools, and aren't going for show quality. I am still in bodywork stage, but have all the supplies to eventually run the rustoleum pro flat paint through a spray gun and try it myself. If i screw it up i can take it down and start over for 100 bucks or so. I figure it is like training wheels for paint work. Stage 1 is this kind of job. As i get better i will work with more expensive stuff. For the money on a daily driver i just don't see how you can beat it. Also, there are a
  11. I'm going fuel injection at some point anyway, so adding a separate bauman transmission controller wouldn't be much of a hassle. Cutting the trans. tunnel doesn't bother me in the least, it's more about avoiding getting into the frame. I think if i was going with something electronic the 4L80 would be the one i would choose, but it looks like the 4L60E can be built to hold 450 foot lbs. I want the extra gear, but when you start talking about tearing into the frame or spending 4 grand it makes for a hard sell to the wife. I get questions like : What's wrong with the one you have? Can't you r
  12. I started out with my grandfather helping me replace a timing chain on a 78 camaro. The do-it-yourself bug skipped my father for the most part. My grandfather could fix or tinker with anything. IT wasn't always conventional. His way of checking fire was to stick his finger in a plug boot. I did not put that in my bag of tricks. After leaving the military i went to automotive school and was lucky enough to have a 1 of the 4 instructors be a mechanical genius who was actually a great teacher. From there it was dabbling with rebuilding transmissions and home hobby jobs for a while as side work wh
  13. I have actually built a few 200-4r's, so i'll be grabbing a couple of cores and starting from scratch i think. Most likely i will get the hardened parts necessary from Art Carr's site. The other option is a built crate transmission from Monster or something similar, but they run around 1700 or so. Add in the adapter plate and we're back into the over 2000, so i may be rebuilding one myself. It seems like space is just a big issue. With the right parts they can stand up to 800hp motors and i doubt i will be anywhere near that, like ever. I had been thinking about the gear vendor overdrive serio
  14. Excellent job Rapom and good info. for those of us considering this. So now that i have a pretty good amount of data about the 2 options i have been thinking about to get overdrive, i am now leaning back towards building a 200-4R.
  15. Fitech has a $1000 efi setup, closer to $1400 if you opt to go with the command center which allows you to keep your mechanical pump. There have been a few good reviews on them so far. Holley is introducing a very similar setup this month i think called the sniper. Those are 2 options well under the 2500-3000 target you would have to hit with fast-ez efi or something along those lines. Supposedly the FItech system works well with single plane intakes.
×
×
  • Create New...