Felix

Pete, Thanks for adding link, you are the man also the Title was fixed by Massachusetts RMV as Vin # was correct, now is Roadmaster 72R Sedan it had said Special 40, I provided documentation and photos

Selling My Buick, Virginia car, runs great, needs rearend, headliner and a few things too much to list, see Craigslist ad ID 7513680967 $4500, serious only, had enough reminiscing tons of parts, will separate to your needs. over $15000. Invested. Cash and you get all + Title 781-422-4289 Kingston Massachusetts

Sorry, Spell check Gungeey, you are the 👨

Gingery, Thanks, this is exactly what I have started, no wanting to cause a shit storm cause I didn’t look at title when purchased. shooting for new title in my name from dad, then do corrections Thanks Felix

Hi, I have a 51 Roadmaster, 4 port. my Massachusetts title shows Model name as 40 and Model number Special. This is clearly a Roadmaster and title is in my dads name, but signed over to me(son). Dad has passed on. The question is run the title as is into my name,then apply for corrections. Thanks Felix

Hi Will 51 Roadmaster 4 door trim fit

Need 2 decent ons I have many parts available also 1951 51/72 sedan Felix

Hi, looking for a few parts tried phone number not working 9098887137 skyking227@me.com

Roadmaster radiator, oversized might solve it

Hi, I have a 51 Roadmaster, it had that most annoying squeak underdash well after 4 years I found it. Heck Ive asked everyone but. it was hood rubbers. Open hood. Look at windshield, dab a little grease on hood contact points near windshield. A friend had a Buick same problem, looked at mine saw the rub marks hell I knew by friction points I saw you call me if it works. This came to me by accident . this blew my mind Steve 781-422-4189

Ben Bruce 51 roddy parts felix 781-422-4189

NOS front fenders $200 each never mounted have old fender wells to match Raditor $150 exhaust manifold $700 no cracks 3 pieces see photo have intake ( no damper assembly ) nice Grille $400 lots of extra parts location Hanover Mass, USA

Hi, I have 2 decent from my 51 Roadmaster 4 dr, bottoms a little crusty. I you can wait a few weeks I am getting new material to repoduce mine, gonna cut a little longer to fit Keep in touch skyking227@me .com

You selling the glove box door skyking227@me.com Steve G

Hi,Need outside door handles 4 (Mine are pitted)Vent window chrome 4 (Mine are pitted)Rocker panel Trim (Stainless) 2 Those long ones, I have the 2 shorts on rear doors (mine are dented)I have 3 sets of above looking for possible betterSkyking227@me.com AKA Felix AKA Earl the Pearl781-585-3212 South of BostonThx

Yes thanks for everyones help, yes sleeves are made today for most shafts. I am glad to not have bought another. Will be installing later in December

So it came off like you said, soaking slid off. Problem is both cars have scoring where seal meets now I need to buy one . Not having much luck trying to purcahse help

Need hood letters missing c in Buick 1940 super Steve. 617-201-6897

617-201-6897 Thx

No holes present, I wish there was, any ideas. The plates are way to flexable with a large jaw puller

I have removed bolt OK but tried to use a large 3 jaw puller lightly but semed to bend due to the construction of the plates I have removed solid ones. I am replacing seal due to leakage. Hoping no scoring on balancer shaft. Have spare on parts car. Anyone have a easier job getting off Sorry forgot 51 Roadmaster

I found these from Then & Now Weymouth Mass these are avalible Any questions. 617-201- 6897

51 Roadmaster I used a strap wrench to hold balancer, counter clockwise to loosen

Question, In removing a manifold from an un molested engine I found no exhaust gaskets (graphite & Oil) to which I expected, only the intake the rings were found but to my suprise 4 intake gaskets (thin metal with raised rings) Where can I buy these. I have used these thicker ones from Cars Inc, would rather find these thin with raised rings Felix

I do have 2 I beleive they are both cracked. I will look today 617-201-6897 Steve