dpcdfan

Closed car or roadster/touring?

Could be 37 Desoto aftermarket.

Hard to tell from the original picture. If the wheelcover is stainless, it's an original. Stamped steel cover would be an aftermarket. I've never seen an aftermarket on the 55-56 caps. My thought is that it's an original that needs a good cleaning.

Matt... Got the set of six 17" rings out today, they look good. The rings are about 1" in depth.

Tom... will do!

Hi Robert, I'm into Mopars and also have some NOS Studebaker parts that came out of Mopar dealerships I bought out. I'll give you a call.

Acually correct for all 57-59 Chrysler wagons.

Hi Brian.. Here you go. The radiator core looks good. The only thing I noticed is that the overflow tube is loose and had duct tape on it. If you need to see anything closer, lert me know. Price on the 50 radiator $175 plus shipping. Thanks.

Matt.... My dad used to love to collect unusual and rare wheel trim rings and fender skirts. Years ago he had a set of 6 of what appears to be 17" stainless trim rings straightened and polished, but never used them. Two of them are still wrapped up from the polisher's shop. Not sure of the depth of the rings, I'd have to measure everything. Here's a pic I took of them at the shop.

Matt... Did you ever find 17" trim rings?

Hi, sorry for the delay in getting back to you. Have one with one connector and one with two. I may have an extra one of each type if you need both the same. Let me know. $65 including shipping. Thanks.

Tim... Got your picture. Haven't found one in my stuff yet. I'll let you know if I find one.

Early 35 still had suicide doors, but used 17" artillary wheels instead of wire wheels, so I would say 33-34 as well.

The picture on the left is an Airstream, the one on the right is an Airflow.

It's 36 Desoto only. They used the same medallion on both the front and rear bumpers. Do you know if your car is an Airstream or Airflow, both used the same medallion.

Rob, Found a hauler that would bring it to you for $1300. Still looking to see if there's anyone else out there to do it.

Hi... I have what appears to be a NOS tail light and license plate bracket. Both stamped with the correct FILITE markings. Tail light is correct for most 28-32 Chryslers, Plymouth and Desotos. Send me a pm or email if you're interested.

Tim... Here's my info.

Is that the top tank # or part #?

Tom... the four radiators in the front of the picture all appear to be 31 Plymouth. The one on the far left is NOS.

I have some CM 6 and CD8 hubcaps.

Here's the pics of the T5 engine and transmission.

Joe, Do you have a picture of the latch?

I'll have to check on the manifold. Do you happen to have the casting number on it? What other Model 70 parts are you looking for?

I'll get you some closeup pics, but short of taking it to a radiator shop and having it pressure tested, it would be almost impossible to know if there's any pinhole leaks.