Hans1

Members
  • Content Count

    252
  • Joined

  • Last visited

Everything posted by Hans1

  1. I have received three of these from same source. / some one using AACA site. administrators, please note. Antique Automobile Club of America - Discussion Forums Hi Hans1, Ashley213 has sent you a message! Read full message — Antique Automobile Club of America - Discussion Forums 2 members active in this conversation (including you) Hans1 Members Ashley213 Members Hello there! Hello! I really like guys who are interested in cars. I would like to imagine this! Can we talk? You can find me here in my profile: http://7date.site/babygirl777 I'll be waiting for you, dear 😃 Read full message Prefer to stop receiving these emails? Adjust your notification preferences. Antique Automobile Club of America - Discussion Forums
  2. Hershey is Therapeutic, for mind and body. Just bring clothing for any kind of weather. Money too. And ENJOY This year will be 56 years in a row, my grand sons with birthdays on 10th and 14th know we will celebrate them again when I show up.
  3. Just makes me wonder if there is a balance condition similar to counter shafts on modern engines. Possibly some sort of vibration attenuator.
  4. My Marvel book on overhauling marvel carb all springs are 1 1/2 inch long, except Essex 30, 31 and 32 and Pontiac sis30, 31, and 32 which use springs 1 1/16 28 Pontiac uses spring 24-115 which appears to be used by many cars. Now to determine spring number 24-115 and different shapes on picture //////////// Buick '25 Master 6 uses air spring 24-115 so they may have the spring for you. I may have some marvel carbs like yours is you need parts. Click to enlarge Price: $15.00 Availability: In Stock Model: 900.M001 Manufacturer: Classic Carburettors Average Rating: Not Rated Qty:
  5. my marvel book on overhauling marvel carb all springs are 1 1/2 inch long, except Essex 30, 31 and 32 and Pontiac sis30, 31, and 32 which use springs 1 1/16 28 Pontiac uses spring 24-115 which appears to be used by many cars. Now to determine spring number 24-115 and different shapes on picture Buick Master 6 for 25 uses air spring 24-115, so they may have the spring you need /////// I may have some parts carbs if you need some. Hans Click to enlarge Price: $15.00 Availability: In Stock Model: 900.M001 Manufacturer: Classic Carburettors Average Rating: Not Rated Qty:
  6. Thank you for the location, I was concerned that it was not close to Orange field.
  7. do I recall correctly: That the rental scooters are to be returned EACH evening at 5 PM and picked up at 8 AM so they can be charged over night? Do we know the exact location where the scooter site is located, may affect ability to comply with rules.
  8. We had a 69 mustang, 72 Grand Torino, 72 Mercury Marquis and 69 Ford wagon, too many keys to carry. had Mustang share two keys with Grand Torino, same for Mercury and Wagon. Just had to turn key over to open or start each car. It was Very handy, can not do it now.
  9. We called them " Van Aukens" spelling of Aukens is questionable in long term memory
  10. If that's all you can walk, see your Dr. Get his note and go get a placard Then enjoy Hershey Oh, rent one near home and being it, much cheeper
  11. Trans number HR-1-B /////////////////// from Hollander Manual Locom's 27-29 8-70 (Jr. 😎 Trans case : HR-1-B note: counter shaft - Hyatt bearing /////////// Hupp Cen 8 '28-30 Trans case : HR-1-B //////////////// Hupp '27-29 A6 after#70000 Trans case : HR-1-B /////////////////
  12. check distributor base timing, and is Distributor advancing properly? check counter weights and pivot points and springs. Might be sticking. Best wishes
  13. wonderful, the reason behind the naming of so many things is very interesting.
  14. Happily received it Tuesday, This will be 56 years in a row !! I just love the time luxuriating in the entire atmosphere there. The group we camp with ranges from 80 to 97, and it's wonderful ! These forums, the people here all have enlivened my feelings and knowledge of the hobby. I will never know most of the persons who represent them selves here but I know they are everywhere at Hershey.
  15. Second car, has similarities to 37 Buick. Most likely a GM car
  16. if you start a seperate thread, you may already know the convertibles were leakin lenas, said Kukla Fran & Olie.
  17. My response was to his description of the tank he has. It does have some differences in outside appearance from my tanks. If someone has documentation of make and model with years used that could be helpful. There could have been more than one model of Tank used in a given year. There could have been changes by owners, even on low mileage vehicles, deemed to be original by some today.
  18. Four screws to hold the metal top on the vacuum tank was used on Essex cars thru 31 and likely 32. // The system works as a two part system. the outer tank is the reservoir for the carburetors operation. fuel is supplied to it by the inner tank thru the flapper valve. /////// The inner tank is the Vacuum reservoir and controller of fuel delivery. ///////////// The inner tank has the float and it is connected to the two little "L" shaped rods which open and close the vacuum supply and opening to atmosphere. The lower flapper valve is important to seal the inner tank so vacuum can be applied to gas line to tank. Normally the gas level in the outer tank will help seal the flapper valve. ///////////// The top inside of the tank top, needs to have the check valves cleaned, I use carb cleaner spray. thay Please remove fuel inlet elbow to top of tank, check there is no filter gauze or other obstruction below it. Next, carefully check sealing surface of flapper valve, It must seal, you may be able to remove clip holding it and reverse the flapper it self. In addition, there is a small vent on the top of the tank. This must not be blocked by the gasket material, it vents the outer tank to let fuel feed to carb. //////////////// Without personal observation it may appear you are sucking fuel back into the tank from the carb feed line, or just not drawing enough into the tank. good luck
  19. Can not seem to enlarge it to be able to read.
  20. The Mill and Drill for the space frame was very interesting to watch. After Mill and drill, many of the "pads" that had been machined were of varying thicknesses. This was the method of equalizing the finished frame for fitting body and other components. ///////////////// A side light from the Fiero Plant floor: personal experience and observation. When attending my first meeting, and walking in a wide walkway to attend a meeting and view line operations, I was showered with sparks from a welder some 45 feet away and behind me at a 45 degree angle. Wearing wool slacks and a cotton dress shirt I was a mass of holes on my left and back side. Now being aware of the possibility of needing more clothing on subsequent visits I observed the welder from a distance . The operator seemed to note single walkers about to pass by, and rotated standing position and repositioning the spot welding gun, would appear to shower the single person with sparks. there were some chuckles about it in the meeting, but ...................... ////////////////////////// At Cadillac, we had a Superintendent bent upon starting his own company to install larger engines in the Fiero, nothing came of it that I know of.................Differential issues were an issue, along with others.
  21. Did your car originally use the "corrugated" style of asbestos insulation? Looks like cardboard box material. Often using metal bands with fold over tabs to hold insulation in place?
  22. We have a delightful group, every one is invited to attend and join us.
  23. Started crusin Woodward in a "51 Kaiser, 54 Buick Century, then Pontiacs 60, 63, 65, 68, then Fords. In '91 gave wife a '91 Stang GT convertible, use it every year. I think the '60 Poncho with tri power, munci 4 speed and 3.90 was the best! Our anniversary is the 19th, so the cruse is a good reminder...............to get the car ready................!