Scott1963

Members
  • Content Count

    6
  • Joined

  • Last visited

Community Reputation

10 Good

About Scott1963

  • Rank
    Junior Member
  • Birthday 11/06/1963
  1. I got 2 of those little comb looking things to measure threads. I "think" they are 24 Standard. But, I am not 100%. I measured it and it is about 15 inches long and 4 and 3/8 inches tall at the longest and tallest points. The rectangular hole that I assume is for the lens is 5 and 7/8" x 2 and 3/4". Thank you for your help on this. It has really stumped me.
  2. Wow.. that is a good question. I used to have one of those little tooth things to measure threads, but I can't find it. I have a hole sizer and the studs are 6 mm and a little loose in the 1/4 hole. I will see if I can find the thread thing. Thank you for the lead. I don't think I looked at many foreign cars to see if it might go on one of those.
  3. I have had this about 10 years and have never been able to figure out what it was. The guy I got it from said it was Thunderbird, but I could never find it on one. Thank you in advance for your help.
  4. I think it is a fender ornament for a 47-49 Studebaker. The one I had was stamped 7719 SM.
  5. Measurement from center of knob rivet to center of mounting hole is about 3 and 3/4 inches long. Square Hole is 1/2 inch.
  6. Thank you in advance for any help. Measurement from center of knob rivet to center of mounting hole is about 2 and 5/8 " Long. Has a treaded collar that is about 3/4 of an inch in diameter.