Jump to content

13CADDY

Members
  • Posts

    243
  • Joined

  • Last visited

Everything posted by 13CADDY

  1. The Antique Auto Shop in Hebron Ky is doing a 29 or 30 president eng overhall--you may go look,but call first-I know the motor is still out of the car
  2. been getting mine at the local boat marina--some small private airports will sell it too--just get yourself a couple of 5 gal gas cans--that's my biggest problem , you can't get close to the pump,without walking---good luck --Tom
  3. you all forgot, he does pictures too
  4. I wish you guys had posted the measurements sooner , i'm still in the sanding stage, trying to get it through the opening--of course it's probably my fault, since i'm putting in my 19 Studebaker---- Tom
  5. Tom, my 19 stude big 6 has wager electronics Tom
  6. like everything else , you get what you pay far--used a shop in Dayton ,Ohio--good quality,quick turn around, it was to good to be true, till I gave them my windshield frame, well they made a liar out of me--after the 4th time of plating it, they said "that'sthe best they could do,i'll just have to live with it " --I don't want to talk about the time it took for nothing--the 2 weeks ended up being 2 to 3 months---I took it to advanced plating in Nashville,Tn. who had done most of the other plating on the car, including the styled steel wheels--excellent work, real good people to deal with---Tom
  7. I'd stop at some of the local body/restoration shops in your--they should talk to you, pro & con--good luck--Tom I had mine built so it also works to build engines on it--
  8. did anyone get to see this 19 light 6 touring car--it was in the RM AUCTION--it was suppose to sell Friday night--just wondered what shape it was in--Tom
  9. looking for 19 stude big six cap,rotor,points etc. any help ?? tom
  10. Terry,you're correct--in front of the maintenance building-i'm not sure of the hours,but I think between 8 & 9--been there myself at 8 & waited till 9:30--the line was to much-now I go to my spot,unload,then drive over-I can shop on the way--good luck--Tom
  11. anyone have a pro or con about Schutzman wheels--need a set for my 13 Cadillac--Tom
  12. looking at your engine photo,since all the head bolts are loose,or look to be,i' pull the head off first--spending a little time looking may help in the end--if the short block is if'y i'd hold up buying parts-head gaskets are cheep-hardest part you need is the starter--the pot metal ends are the killer,they don't last--had that problem with my 23 light six,took 3 cores to make one--good luck--Tom
  13. I've lost the advertising banner that use to run over the top--any one else ? TOM
  14. you might try car-part.com--it goes all over the country--can't believe Bairds in fairdale can't help you or refer you to someone--Tom
  15. beautiful car,good price,what more can you ask for--would like to have found it before I started on my st regis---Tom
  16. I agree about apple--shipped mine 3 times back & forth,& they still leak--
  17. good idea--i'll try it tomorrow===Tom
  18. working on a 6cyl model55--the tra won't go into 2nd or 3rd gear--1st & reverse are fine--any idea where to look-will the free wheeling have any affect --any help is sure needed--thanks,Tom
  19. how about a location of the parts--moving them may have a affect on price
  20. Joe,i used Rhode Island for my 32 st regis--had to send the old harness & they made one up--just got around to installing it & Marsha was very helpful-I had only had it for 15 years--I knew I was going to need one, just bought it a touch early-good luck-if you need help let me know---Tom
  21. the lebaron-bonney web site lists shops they recommend-i found one in n.east Cinti.-did work for me in 1 of my studebakers--very pleased with the outcome--just remember,you get what you pay for--Tom
×
×
  • Create New...