1938CenturyCoupe

I had a Century a few years ago and have always regretted selling it. I know these are hard to come by so I’m willing to pay up for the right car. 2dr coupe or convertible only. My Century had an engine (massaged) by Kenny Duttweiler. It ran strong. I’ll get a few photos uploaded tomorrow.

These parts will be posted on eBay at No Reserve at 1800hrs on Wednesday, 10 June 20. https://www.ebay.com/itm/143628397791 Please feel free to contact me with any questions. John (510) 684-7525

These parts will be posted on eBay at No Reserve at 1800hrs on Wednesday, 10 June 20. https://www.ebay.com/itm/143628397791 Please feel free to contact me with any questions. John (510) 684-7525

These parts will be posted on eBay at No Reserve at 1800hrs on Wednesday, 10 June 20. https://www.ebay.com/itm/143628397791 Please feel free to contact me with any questions. John (510) 684-7525

Here's the deal... a good friend recently purchased one late 1920's and two early 1930's Peerless Motor Cars - a boat tail roadster and two sedans in the back of a warehouse in Berkeley, CA. These vehicles were restored a number of years back and came with a parts lot. Couldn't let this lot go to the scrap heap so I'm hoping there's at least a couple people out there that could become the custodians of these parts. Figured any Peerless aficionados could be found here at AACA. The following parts are included in this offer (as well as a few we might have missed - you're going to get them all): (1) Straight Six Engine (Long Block) 8U-6703 data plate Incl. intake/exhaust manifold / rear mount (bell housing?) / flywheel Appears to be correct for a Model 80 (Second Series) (1) Straight Eight Engine (Long Block) -missing data plate Incl. harmonic balancer / 4 24 31 (date?) casting on block (1) Straight Eight Engine (Block) 13K-1159 data plate 5 28 30 (date?) casting on block / no head Appears to be correct for a Model B (Master Series) (1) Straight Eight Engine (Block) 15K-3004Z data plate 6 5 31 (date?) casting on block Incl. intake/exhaust manifold (2) transmissions (1 larger one, 1 smaller box possibly early or 6 cyl. box?) (2) eight cylinder crankshafts (2) oil pans (8 cyl. - rusty pin holes) (2) oil pan baffles (8 cyl. - rusty but solid) (2) head gaskets (8 cyl. - decent cond.) (1) seven-lug rear end (1) seven lug front beam (1) steering column/box (2) intake/exhaust manifold setups (2) side mount wheel covers (1) driveshaft (2) 8 cyl. flywheels (6) 19" wire wheels (2) starters (2) generators (2) pedal assemblies (2) fans (1) fuel pump Set of 8 cyl. rods Some Valves (2) distributors (rusty)(1) carb (for parts) (3 or 4) wrenches Orig. wrenches Main bearing caps (2) water necks set of trunk spears (1) steering wheel (1) dash Other ancillary parts including brackets, various gears, etc. You get it all. This was all recently excavated from a warehouse and most of it is rusty and dirty. The engines look to be good cores. Contact me for more pictures. The parts are palletized for shipping. We are open to offers but are looking to sell the entire lot rather than piece by piece. Email me and I'm happy to send pics, unfortunately I can only post one photo here due to it's size. John in California (510) 684-7525

Here's the deal... a good friend recently purchased one late 1920's and two early 1930's Peerless Motor Cars - a boat tail roadster and two sedans in the back of a warehouse in Berkeley, CA. These vehicles were restored a number of years back and came with a parts lot. Couldn't let this lot go to the scrap heap so I'm hoping there's at least a couple people out there that could become the custodians of these parts. Figured any Peerless aficionados could be found here at AACA. The following parts are included in this offer (as well as a few we might have missed - you're going to get them all): (1) Straight Six Engine (Long Block) 8U-6703 data plate Incl. intake/exhaust manifold / rear mount (bell housing?) / flywheel Appears to be correct for a Model 80 (Second Series) (1) Straight Eight Engine (Long Block) -missing data plate Incl. harmonic balancer / 4 24 31 (date?) casting on block (1) Straight Eight Engine (Block) 13K-1159 data plate 5 28 30 (date?) casting on block / no head Appears to be correct for a Model B (Master Series) (1) Straight Eight Engine (Block) 15K-3004Z data plate 6 5 31 (date?) casting on block Incl. intake/exhaust manifold (2) transmissions (1 larger one, 1 smaller box possibly early or 6 cyl. box?) (2) eight cylinder crankshafts (2) oil pans (8 cyl. - rusty pin holes) (2) oil pan baffles (8 cyl. - rusty but solid) (2) head gaskets (8 cyl. - decent cond.) (1) seven-lug rear end (1) seven lug front beam (1) steering column/box (2) intake/exhaust manifold setups (2) side mount wheel covers (1) driveshaft (2) 8 cyl. flywheels (6) 19" wire wheels (2) starters (2) generators (2) pedal assemblies (2) fans (1) fuel pump Set of 8 cyl. rods Some Valves (2) distributors (rusty)(1) carb (for parts) (3 or 4) wrenches Orig. wrenches Main bearing caps (2) water necks set of trunk spears (1) steering wheel (1) dash Other ancillary parts including brackets, various gears, etc. You get it all. This was all recently excavated from a warehouse and most of it is rusty and dirty. The engines look to be good cores. Contact me for more pictures. The parts are palletized for shipping. We are open to offers but are looking to sell the entire lot rather than piece by piece. Email me and I'm happy to send pics, unfortunately I can only post one photo here due to it's size. John in California (510) 684-7525