phils

Late reply but yes you can, you need to remove a few cotter pins but it is possible.

Front axle ?

That would be very usefull, I really have no idea how it should go, later ones have a pivot on the riser and a stop, mine has neither and I can not see where the possible pivot could be to move the needle. Of course the carb and riser might not match! thanks phil

HHis till looking for rear bumpers if anyone can help? thanks phil

Thanks, I have done and hopefully he will have one, but he has probably not even got the email yet!

Hi have a 24 with a carrier if you need some dimensions. jscheib if you know of a 24 front axle I need one!

Are you looking to sell? If you are how much do you want?

I have a 24 44 6 in process of rebuild. one area that completely stumped me is the carb, I have seen later cars but none like mine. I just can not work out where the pivot points are for the controls on the carb should be. It's on the riser on later cars but mine does not have the lug. any idea or pics or parts out there? thanks phil

Hi all i need a front axle for my 24 44 6 as the one I have is bent, looks like it had a fairly big smack in the late 70's anyway if anyone has one I would be very interested in it, could do with a set of springs too, again front as one is very different to the other. my rebuild is moving again after a long stall, mostly waiting for some ash to redo the wooden frame, someone had repaired in the past but used thin softwood so had too much body flex and too many large gaps that should not have been there! any info on the woodwork for a 44 would be gratefully received! thanks phil

Can I hijack this old thread slightly, allright completely. i need a front axle beam for a 24 44 6 , I am hoping everyone who posted above will get a note saying reply and one may still have an axle? in the meantime will also post a new thread. how is the rebuild going, I have numerous small spares that may or may not be of the period. thanks phil

oh here is a pic- looks better than it turned out to be! phil

Hi can anyone out there help me with detail pics of a 24. I particuarly need pics of the advance/retard mech all the way from the lever on the steering wheel and the same for the accelerator, but including the foot pedal. Others of body/floor/woodwork/rear trunk lid open and shut etc etc would alse be appreciated! Thanks

Asked fred, he has been aunable to help yet as well, which is why I bumped the request, in the hope someone has one !

think they are but still only got the one side. The speedo I do have looks a bit unusual, A revious owner took apart and bust unfortunatly! Phil

the car is a flint car left hand drive. Still missing emergency brake for left rear, speedo, throttle linkages the ones on the carbs speedo, rear bumpers and a shed load of other small bits!