Jump to content

ddhebert

Members
  • Posts

    8
  • Joined

  • Last visited

About ddhebert

  • Birthday 11/17/1964

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

ddhebert's Achievements

10

Reputation

  1. Yes you can convert it but you'll have to change the Brake pedal bracket which you have drop the steering coloum and REMOVE the INTAKE MANIFOLD., Proportioning valve, and the brake lines are different sizes but on the bright side you don't have to change brake calipers, pads or rotors. All in all its aaaaaaaaaalllllllllllllllllloooooooooooooooootttttttttttttttt of work !!!!, And you take away from the originality of the car. I was thinking of doing the same thing but after talking to several people it I shyed away, Legal issues, Vehicle value in selling some day and so on. Hope this helps.
  2. Yes your right I just bought one on EBay so hopefully I can get this working correctly. Thanks for the advice.
  3. Hello this car is driving me NUTS ! Does anyone know what wires go where and what should be hot + and what's supposed to be Neg. - ? The ABS pump only works when I jump it directly to the red hot wire. "Crazy car" Thanks for any help :confused:
  4. Could I wire it straight to the psi switch to the relay to run the pump ? Via fuse of course !
  5. Checked fuses ok, when pump is hot wired it works great it builds the psi and a nice pedal. I'm stumpped !
  6. Hello everyone, I recently had a problem with my brakes ABS light was always on but then the RED Brake light came on and the pump would run with the brake applied only for a few seconds so I did some research and replaced the accumilator and seemed to be fixed. Then I looked at the relays because the ABS light was still on and a couple of wires seemed to be melted so I tried to repair them and pulled too many out and lost the diagram so, A very nice member e-mailed it to me I replaced the relay with a new one a still no power to pump but it will work if I jump the two red wires at the relay. Hey Thanks in advance for any help.
  7. I just purchased this car and I replaced the accumulator and worked well but ABS light still on but no red brake light and a nice pedal. So I decided to look at the relays and noticed a little melting soooooo you guessed it I !@?& it up. PLEASE ANY HELP WOULD REALLY BE GREAT !!! THANKS, DAN hebert22@comcast.net
×
×
  • Create New...