Allan.Almeida
-
Posts
59 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by Allan.Almeida
-
-
Hi Everyone,
finished the mammoth restoration project in great time.
have attached some images.
Question.
the propeller shaft center cross bearing is under the cross brace, should it be up ? seems too low at the moment
right now there is no space to shift it upwards
and when we received the barn find car it was this way only
any one can help me with pictures of a limousine underside to understand better, so if i have to shift it upwards i can get a better understanding
Thanks in advance
- 4
-
So on the 55 chrysler c70 crown imperial
I have finished the body work and doing a dry fit of the chrome mouldings before they go in for final chrome
Have attached a pic
in the meanwhile, i am rebuilding the hemi engine and would like some help in figuring the correct color for the enigne block, head and all the ancillaries.
Would be of great great help
Thanks In advance
- 5
-
also bumping this thread as i need a fuse box and relays etc
any source for these ?
-
On 4/14/2023 at 8:57 AM, mobileparts said:
Depends on what you need --- mechanical parts --- Master Cylinder, All SIX (6) Wheel Cylinders, Brake Hoses, Brake Shoes, etc., etc. --- that would be me --- Always best to simply call me--- 516 - 485 - 1935....
I also have a good bit more for that vehicle, but strictly NEW and N.O.S. parts....
For cosmetic parts --- the used world --- fenders, grilles, moldings, lenses, etc. --- there are NO " good " sources --- stating what you need or want in here, may produce a phone call or two.....
Craig.....
Mostly trims and cosmetic and electrical fittings
-
-
Skip Nolan would have a website ?
-
Hi,
i m restoring a 1935 cadillac v12.
was searing for a few items
headlight lenses
tail light lenses
ignition switch and key
hub cap set
horn button
grill monogram
grill mascot with base
any sources that stock parts ? or anyone on the forum that can help me source them
will be much obliged
-
Hi,
i Have just started restoring a 55 imperial limo,
for parts, which are the best sources ?
-
-
Also weatherstrip especially the rear windscreen
where would be my best option to look out for one
-
Hi Guys, im working on the following car here in India
1955 Chrysler imperial crown limousine (vin no - C-551108) (12V) 331 HEMI
Have attached a few pics of the interior upholstery thats original. The attached pattern comes in the center portion of the rear seats
Where could i source a similar material since im totally re doing the interiors. what would this pattern be called
Any help would be much appreciated
- 1
-
-
thank you guys,
any leads for a rubber weatherstrip kit for the car
regards,
Allan
-
Hi,
we recently imported 3 lincolns into India
one is a 46 which i have started working on and the rest two are 47s
for the 46 the vin number reads as H148401
and body tag reads as 5EH 77 3222
what exact year woudlk the car be and what body style, its a coupe. but im confused whether there are different styles to it
i need to order a rubber kit for the car, any leads to where i would get a complete weather strip kit would be great
thank you so much,
attaching a picture of the car
-
-
-
-
hi guys,
can anyone help me with the spare wheel
after i place the spare wheel and insert the locking bolt.
does there have to be a round plate with a wind nut or just a wing nut
pictures of a correct mouting would be really appreciated
thanks in advance
regards,
Allan
-
HI,
i have been trying to search for the rubber weather strip for the side rear glasses....the fixed glasses
any leads as this is urgent
thanks a ton
-
10 hours ago, JohnD1956 said:
Trunk light is right without a cover. And Gas tank filler neck is open too.
As for the sill plate, the one in my 56 Super is also flat. But don't go by that for the 55 Roadmaster. Hope someone chimes in with the correct answer on that.
thanks John
shes now nearing completion and should be complete in a few days hopefully
-
HI Guys,
need some help again as the car is coming near to completion
have attached 3 pictures
sill plate:
the picture attached is of a sill plate i have purchased which fits correctly....only problem it is plain without any design..should there bee any kind of design on the 55 roadmaster and if yes what kind
Rear trunk light
as you can see from the picture the rear trunk bulb is exposed , is this how it should be or should there be a cap on it..please advise
fuel cap inside
as you can see in the picture , there is a gap around the fuel pipe coming from the trunk and the the body fender inside, should there be a rubber around this?
please let me know and if yes,m any links to sourcing one
thanks in advance guys
regards
Allan
-
Quick Question
What Color should the Gearbox be painted in ?
regards,
Allan
-
Hi Guys,
need some urgent questions answered please
- i am painting the car a metallic shade, what color should be in the interior inside and in the rear boot, should it be the same metallic or the same shade in solid
- the bottom cut shade, where should the color end in the doors, should it travel inside to the door ledge or end in the outer body only
- the convertible roof, what is the period correct material to use
car is going in for final paint tomorrow hence the urgency
thanks a lot in advance
regards,
Allan
-
well we have gone a bit bizarre , but hoping that it will look good.
Final color combination will be copper above and cream below
still need to figure whether to use a golden tan or cream top ...
need some help: the chassis in the engine bay, should it be a semi glossy black or a glossy black. ?? need to know this
Earl: Sir, thank you very much, but managed to get the locating pin from Windsofchange and luckily my dash is also being reconditioned, so eagerly awaiting. Wishing you a speedy recovery sir.
regards,
Allan
- 3
1935 cadillac v12
in Cadillac & LaSalle
Posted
Just finished building the 1935 v12 fleetwood design concept of Mr Viveck Goenka's.
Completely built from just a rolling chassis
attached are a few pictures