rmccoy

Members
  • Content Count

    33
  • Joined

  • Last visited

Community Reputation

10 Good

About rmccoy

  • Rank
    Member
  • Birthday 04/29/1940
  1. Mr. WAFH: The bolts that were on the molding on outside piece were carriage bolts.They slide in the inside of the rail of the molding.I do need the supplier of the running board matting. Thank You R McCoy
  2. Thanks Mr. Tinindian: I will give Egge a call, R McCoy
  3. I have a 1931 pontiac 401 and need new valve springs, would anyone on here know a supplier for the correct springs? Thank You, R McCoy
  4. Packard32: Thank You for your reply. I will try to locate the matting Again thank you RMcCoy
  5. I bought a 1930 Packard 733 coupe with the running boards off car with no matting on them. My question is what pattern matting would be used on that motel? Thank You Dick M
  6. I see an add on here from bobnroman selling running board mat material. Has anyone used his mats and are they approciate for a 1930 packard 733 coupe? Thank You for your opinion.
  7. I do not have tail light lens to help you. This is the first antique car I ever worked on and it is missing a lot of parts because a lot of people workes on it before I bought it. I would be interested in your socket if you would sell it. Please let me know and also the dementions of it. Thank You very much for your reply rmccoy
  8. I am in need of a three prong plug for a 1930 packard tail light. I think the same pluh is used on the headlight. Sure would appreciate any help. Thank you rmccoy
  9. I have a 1930 733 Packard and need running board moulding,I have a piece of the old and it has four ribs Thank You rmccoy
  10. rmccoy

    1930 window frame

    I bought a 1930 733 coupe that others took apart and the window frame has been primed with no glass. My guestion is dose the inside get painted the same as the outside or a different color and what material is used when the glass is instaled? Between the glass and frame. Thank for your reply rmccoy
  11. rmccoy

    1930 window frame

    I bought a 1930 733 coupe that others took apart and the window frame has been primed with no glass. My guestion is dose the inside get painted the same as the outside or a different color and what material is used when the glass is instaled? Thank for your reply rmccoy
  12. I bought a 1930 733 Packard coupe a couple of months ago. It has been in restoration for 20 years .I am missing alot of parts and one is the muffler and the pipe to the manifold is there but needs replaced. I need to know what is acceptable. I called Max Merritt the cost to make one like the origianal 350.00 , NAPA is 39.00 for close to same dementions.The piece with the flange at manifold is 150.00. Thank You for a reply R McCoy
  13. jwilli43 I think the round parts are for packard Bumpers. I would be interested in a couple of them. Thank you, rmccoy@windbercare.org
  14. Thank you Mr flintauto for the information r mccoy
  15. I am looking for a 1930 raditor cap and radiator packard embleem. also 19" wire wheels (5) .