Alfre

congratulation on the morris and getting the axle out of the tractor. We just returned from the vcca happy days tour too mayberry NC driving the corvair , had a great time and covered 1999.9 miles round trip. Al

I have a 23 24 28 gardner what would you like to know Al

Looks like kubota uses black rtv for gaskets ,same as newer John Deeres if you get good at this type of repair I've got a full size Deere you can work on. Al

track down 6v battery

So spring is in the air down south, here in central NY snow is still about 8 inches deep and temp may get to 40 today. I have started the corvair ,gardner and 29 chevy the 53 is in storage about 3 miles away but haven't driven any yet. the snow mobil still works good at this time. Al

does the motor have two large capacitors mounted on top? if it does you have a start switch inside that needs cleaning or replacing. Could have just one capacitor Al

More apt to be pitted start switch.

If you have any amish in your area they have some one making belts. Al

You are correct it is a valve seat reservicer, it has adapters that hold the valve by the slot or dimple in the valve head and rotate as you stated using grinding compound.

I agree with tool room tag. Al

It drives out buy hitting the nut end. Al

You are running on only battery power. The amp meter can not react that quickly to show points opening and closing with the engine running . Al

As one who converted VW beetles into total electric in the 70s I think you made an excellent choice . Al

american austen or a bantam they the same

The llamas will get used to the intruders, they are cuties Al

Check the flywheel key B&S use a soft key and it will ware of sided.

mabe Renault

congratulation on the certification Al

A new one can be bought from atwater kent in MA.

John you will get that H P O F hands down Al

Try putting air pressure on the fuel tank through the fill pipe, use a rag and a blow gun this way you will not over pressure the tank. Too suck with a compressor use a blow gun held at about a 45 degree angle to the fuel pipe and blow across the the pipe away from the pipe. Al

Looks rather loose timing chains and sprockets are changed as a set. Al

In New York titles first issued in 1973 Al

great photos Al

This is an old style two long dubble over springs that go on the tie rod one left one right center bracket on axle, can't figure out how to install.