Eldovert

I have 4 lamps available here..no lenses. Offers ?? Cheers,Pat

$250.00

Can someone narrow down the year of this Paige radiator for me ? Thank you,Pat

Not sure what year Cadillac these fit ..I do know they wont fit my '55 Eldorado :confused: I am looking to move these along if anyone is interested. Cheers,Pat

Could someone please ID these Buick caps ? Thank you for your time. Cheers,Pat

Brandon, If the shop is competent there should be no issues. If you have any stock car racers in the area ask who they use. Cheers,Pat

Brandon, If there are no repops available you can take your rims to a race fab shop and have them widened , or have different centers welded in. I had my rear rims widened at a local shop. They mounted the rim on a fixture and cut the wheel in half and welded a two inch wide band in..turned out quite well. Cheers,Pat

I think that would look good on the back of my 38 Stude K25. Cheers,Pat

Truckhunter, The J's could be had in seven different chassis lengths from 214 to 334.I have cab to axel and cab to end of frame specs for all the J's..any idea what you are wanting to build ? ie. long wheel base - three axel tractor ? Cheers,Pat PS. One of these trucks was supposedly sited in the San Francisco area in 1986

I have a Marvel carbureter model "VA" with 10-740 stamped on the bottom. Does anyone know what this fits? Cheers,Pat

Ron is indeed the owner of the J...but I was going to ask before I posted his number on the internet.

Truckhunter, A friend of mine in California has the only J extant..unfortunately missing the front sheetmetal. If you PM your email address I will try to help you out.

Does anyone have an idea what this wheel may fit ? The splined hole is roughly 4.25" Thank you,Pat

Leif, My apologies for the delay..here is the rear of the wheel.

20 inch with five bolt holes on six inch centers and a five inch hub hole Cheers,Pat

$200.00 Cheers,Pat 250-598-5602

Thanks to all for the ID on the 18 " wires. Can someone ID this wheel ...19 inches with a 6 on 6 spacing and a hair over 4 inch width. Cheers,Pat

Is this what they meant when they said walking is good for you ? Cheers,Pat

Hi Paul, I am interested in selling but I am going to give Chris first crack at them because he got back to me first.If things don't work for him then I will let you know.I see you are in B.C. so at least the shipping wouldn't be a killer..I do have a couple of very similar wheels that are 19" Cheers,Pat

Hello, Could someone please ID these 10.5 inch (outside diameter of trim ring) Note the "peak" in the top front. Cheers,Pat

Could someone please ID these wires. The tire is a 600/650-18 and they mount with seven bolt or stud holes. Thank you,Pat

Those can be the most expensive headlights one will ever come across! Cheers,Pat

Thanks Ben ! Cheers,Pat

Thanks Guys, I will try the Stude forum. Cheers,Pat

Could I ask you fellows to gaze down at your early Packard floors the next time you are out in the garage ? Does this floor look similar to what you have ? Thank you,Pat