db17

Hello everyone, I am no longer working on DB cars. I have some parts I don't know what to do with. Someone probably needs them. Can not store them anymore. you tell me what they are worth to you. 1928 head, 1917 front fender 1917 transmission gears 1928 front axle 1928 complete front and rear wooden spoke wheels, including rear drums 1928 water pumps

I have the following parts for sale: 1. front axle / spindal really good condition, 1928 2. 1928 six cy. head 3. 1928 exhaust manifold 4. set headlight buckets with glass 1920s 5. 1915-1919 Dodge Brothers headlight 6. 1915 front fender 7. all four wooden wheels with drums for 1928 Dodge Brothers sedan 8. 1917 DB transmission gears Do not have room for more pics so let me know if you are interested on item without pics

Maybe this will show it a bit better, Hope it helps!!!

I have a Dodge Standard Six, but a 1929, J number on the frame and motor. Mechanical brakes, Monroe shocks. Looks like original color was Blue. Has the chrome lights and trim on the cowl. Wooden wheels. Carburetor and distributor both falling apart.

Hi Greeder, I have a 1929 Dodge distributor for sale. It came from my Standard Six Sedan flat head six. I got it from Myers i.e. Australia. I payed $400 for the bowl and another $100 and something for the double points, and $75 for the cap. I took my old crumpled up distributor and put together a new rebuilt one. I'd like to get what I payed but if you can come close I'll let you have it if your interested. estev1917@gmail.com

I have several parts for sale that will work on Dodge Flat head Six. head, rear axle, front axle. brakes drums and back plates. Wooden wheels set, wooden spokes, drums, metal tire rings with lug nuts, $700

I have set of 1929 Monroe shocks for sale. $150, All need seals but are free moving. These were used during the change from Dodge Brothers to Chrysler. estev1917@gmail.com .

Have four wooden wheels, 2 front 2 rear for a 1929 Dodge Brothers Sedan Excellent shape, solid wood, no rust, drums still in good shape, already cleaned and painted, new bearings installed.. . $1100 plus shipping, estev1917@gmail.com .

1929 Distributor, new bowl and new double points. Aluminium, newly manufactured for flat head Six, . $500, estev1917@gmail.com .

For sale professional rebuilt OX-2 Carburetor for Dodge, Plymouth, Flat head Six. Purchased but will not be using it. $700. estev1917@gmail.com

Thanks Bob for answering my plea.

Thanks Bob, Received the clips, your a life saver. Thanks for going out of your way to help. DB17

Hello Gentlemen, Again I find myself needing help from our club members. To finish my transmission build I need the two clipsthat hold the thru-out -bearing in place. A club member has provided me with some clips but were for a later model and will not work. I have provided a picture, (see below part number B-11424 and Part # B-6024). Later model transmissions use a 45% hole for the set screws while earlier models use a 90 angle. Thank You! Any help will be appreciated!! Attached Thumbnails

Hello Gentlemen, Again I find myself needing help from our club members. To finish my transmission build I need the two clips that hold the thru-out -bearing in place. A club member has provided me with some clips but were for a later model and will not work. I have provided a picture, (see below part number B-11424 and Part # B-6024). Later model transmissions use a 45% hole for the set screws while earlier models use a 90 angle. Thank You! Any help will be appreciated!!

Thanks for your reply. I have had a response from the sealer. That my question has been answered. Steve

Hello, Gentlemen, Since we are on the topic of transmissions. Can anyone tell me if the guts of a 23 Dodge trans fit a 1917 Dodge trans? I eed to find replacement gears for my 1917. Thanks Steve!!

Hello everyone, I am in the middle of rebuilding my 1917 Dodge Touring car Trans. Some of my gears need to be replace due to damage to the gears teeth. Can anyone tell me if 1923 trans gears are inter-changeable with a 1917 trans? There are some gears on ebay for sale, which end in 19 hours. If they will work I would like to bid on them. I'm in need of the "Countershaft drive gear". I noticed the DB parts book has this gear listed with two part numbers, 16107 and 24247. Maybe someone can clarify the difference between the two. Thank You!! Steve

Hi Jim, I'm not ignoring you, I'm looking forward to talking to you. But I don't know what part of the country your in. I'm in Texas, Central time. Don't want to call you at a bad time. Are you ahead of me or behind? Later, Steve, (got your number on my cell phone)

Thanks for taking time out to help. I'll will check out these sites Thanks Again

I agree Dennis, I did go to one local place but not able to come close. But I think they just looked at the brand they sale. I need to find some place that offers several brands. Thanks Dennis

Hi 1917businesscar, Thanks for the reply. SKF is the brand or maker, correct? The bearings on my car now are Timken 288 for the rear axle. I was told they were no longer manufactured. I purchased some bearing from Meyers but they were to narrow. I will try again at my local bearing store with you added info. Thanks Again Did you have this problem? (see pic) The drum moved so far back it cut the, back dust cover and oil tube?

I know this problem has been addressed and solved before. For those who have a 1917 Dodge Full floating axle what was your cure for bad bearings? I know these bearing are no longer produced. What did you guys or girls do for a replacement? I know this problem has been solved already. Thanks!!! db17

Yes, length is 31 1/16 in. Its a round shaft, taped back on both ends by 2 1/2 in. The measurement of the square ends is 1 1/16 in. square The shaft has the number B-W 239 Took a picture but can't move it to this site. Thanks for the response.

WTB rear axle shaft and flange for 1917 Dodge Touring car. 210-863-9862, or estev1917@gmail.com Thanks for your help!!!

Still working on it, here is the motor getting put together.