MAG473

Wood framework early car seat base and toe board base. It was with 1913 Cadillac touring body parts, but not sure if it for that car.

That looks like a match. Thank you for the I D.

I am restoring a 1913 Metz 22. All mechanical parts have been repaired and ready to assemble. I found an engine belly pan and seat back in this pile of parts. 2 parts I have been searching for. Also a pair of axles with wire wheels.

I purchased a pile of parts which contained some Metz 22 parts. Also in the pile was these touring body panels. It has three doors. No door in the right front. Can anyone ID this touring body??

Thanks

For Sale: Mitchell gas tank, approximately 36" long, 12 .5 " diameter, Mitchell embossed on the tank. Nice solid tank with gauge. $350 offer. Southeastern Minnesota.

For Sale: Mitchell gas tank. Solid straight tank with Mitchell embossed on it (see photo). Gauge included. Slightly over 36" long, 12 1/2" diameter approximately. Price $350.

Is there a serial number list for year for the Metz 25? I have the model 22 numbers. Have a couple engines in the 40,000 and up range.

The engine and transmission will bolt up. I agree it is a late teens mack engine. Sold for $10.

What engine is this?

Anyone know who had the Galloway motor truck project at Chickasha this year. It was in one of the two main buildings.

Left rear upper and lower hinges and all four latch assemblies. The rectangular assemblies with the lever to open the door, mount in the door.

Wanted door hinges and latches for 1925 Dodge touring.

Wanted rear door hinges for 1925 Dodge touring. Will buy complete door if available. Wayne in Minnesota.

Thanks for the lead.

Wanted: metal seat back for Metz 22 roadster.

I'm my group of Metz parts is a metal seat back which I believe is not Metz. It does have the double barrel shape, but has a raised bead on the ends, see photo. Any ideas on what it is and does anyone have a Metz 22 seat assembly?

Help identify this horizontal opposed air-cooled engine. Sorry only one photo. Auto?

I have a complete Graham engine with supercharger to sell. I was told it was a running engine when removed from the cards. It has been stored inside on a cart. $2500. Located in southeast Minnesota.

For Sale: One pair of front fenders for 1959 Buick Invicta. Used Texas fenders. One has a small rust hole in bottom rear of fender. Other fender has surface rust on top front part. $350/pair. 507 two six nine 6696. Rochester MN area.

1951 and 1954 Kaiser engine and hydramatic transmissions for sale. Complete with aircleaner starter and generator. Not stuck. $350 each. Located in SE Minnesota.

Thanks Jerry, As I am finding out, the model 22 wheelbase was increased from 90" to 96" in 1915. This was accomplished by moving the axle back 6", increasing the length of the radius rod and using a 12" longer chain. In addition a longer runningboard and apron (between body and runningboard) was used.

Thanks Phil.

What is the original factory paint scheme for the Metz 22? I see some cars with blue body frame and springs with black axles and cross supports. Others, everything is blue except the wheels.

Help identify this wheel rim. 25" outside diameter x 2-1/2" wide. Has two T shape hooks opposite each other on inner arc. Solid wheel rim.