-
Posts
6,501 -
Joined
-
Last visited
-
Days Won
3
Content Type
Forums
Gallery
Events
Posts posted by countrytravler
-
-
2 hours ago, Verne L Frantz said:
The original engine has a cast date of Nov 16, 1960. It was one of the first batch of castings that were done with an incorrect casting number. The incorrect one was ground off and stamped with the correct number. The second batch of castings also had an error on two digits which were also ground off and restamped. The 3rd batch of castings finally got all 7 digits casted correctly.
I'm aware of the original design engineers for the W project. What was your father's name? Was he assigned to the project after it was developed in '58 or part of the original team?
BTW, the 400hp 409 you owned was one of just 742 produced in '65.
Verne
The 65 09 400 were mostly installed in the lighter big cars. Very few found there way into a SS convertible.
-
2 hours ago, Verne L Frantz said:
The original engine has a cast date of Nov 16, 1960. It was one of the first batch of castings that were done with an incorrect casting number. The incorrect one was ground off and stamped with the correct number. The second batch of castings also had an error on two digits which were also ground off and restamped. The 3rd batch of castings finally got all 7 digits casted correctly.
I'm aware of the original design engineers for the W project. What was your father's name? Was he assigned to the project after it was developed in '58 or part of the original team?
BTW, the 400hp 409 you owned was one of just 742 produced in '65.
Verne
His name was Ben Montanbeau. He was a backup driver for NASCAR in the 50s until he smashed a Sheriffs car in Joplin MO when he was drunk. GM hired him as an engineer and a professional driver. He would bring these cars home and street race on 96, Woodward and Telegraph. He would take me and friends on these joy and professional rides. George and Zoro were at our house working on cars. They were my dads drinking buddies. LOL. I had a great childhood during these times.
- 1
-
-
-
-
-
-
6 hours ago, 30DodgePanel said:
One of your recent trips ? Wow, you are very fortunate to be able to be able to travel and see this stuff. Never take it for granted Dave.
Thanks for sharing and be safe out there...
Not my load. I was supposed to haul this load but the timing was not in our favor. This is one of our customers that lives in Southern CA and the load went to Chico CA. Couple of the trucks we sold to this customer. I did do these loads.
- 5
-
-
-
-
-
-
-
On 2/15/2012 at 9:23 AM, DodgeKCL said:
The 1 1/2 tonners had bigger cabs on them which they shared with 2 ton from what I know. Also starting with the 1 1/2 ton cab the engine hood has a big sign on both sides saying 'DODGE BROTHERS' or 'DODGE'.
I went back and spent a bit of time going through the 10 photos of your truck. We'll get it right yet. I missed a couple of things. The gearshift lever and transmission tower do not follow the shape of a 1/2 ton. The rad grille has a diiferent crankhole from the 1/2 tonners. The 1/2 ton crankhole is connected to the bottom of the grille by a long stem. However the larger trucks have 'rounded ' corners on the bottom of the windshield rather than the 'sharp' corners of the 1/2 tonners which yours seems to have.
Yes your truck does appear to be listed as "K-34 1 1/2 ton Cab" with a correct serial number for that series. So several things now come up.
The truck is much bigger in the flesh than in the photos. The front fenders are most likely going to be bigger than the car fenders so you may end up repairing what you have as 1 1/2 ton fnders are going to be rare. The rear fenders appear to not have the same 'pattern' on them as the 1/2 tonners so they too will be hard to find. The serial number listing says the closing date was 'Oct. 1935' but it has the dash of a '33. Typical of CPDD manufacture in those days. Unless the cab has been switched it appears the truck has a left over '33 cab.
The serial number on the HC/KC series is stamped just behind the rear spring shackle of the front left spring. It's quite large and near the bottom of the frame face. The numerals are about 1" high and the stamping is about 6" long. The number is stamped into the steel so a wire cup brush on a drill is safe but do not use a sanding disc. If it matches the serial number you have then it is indeed a 1 1/2 ton Commercial Express pick me up.
Cabs from 1/2 ton to 2 ton are the same. The fire wall and toe board is different.
-
12 hours ago, Rust-Ler said:
SBA Does anyone have or supply these hubcaps???
-
Headlamp mounts are different on a truck. Great price.
-
On 3/27/2020 at 2:18 PM, Uptowndodge said:
Bunch of great parts but that doesn’t mean shit when the guy won’t even answer anyone’s questions on prices. He’s like Dave from Dodge city shows all of us all these sweet 36 Dodge’s parts and sold none. WTF
And your point?? Do you know the whole story? What do you do to help? Next saga please.
-
-
On 5/29/2020 at 1:16 AM, romalia said:
yes,
there are several sites through which you can get estimate of this . click here to know about that.
Are you a broker? Have your own trucks?
-
-
-
-
We worked on this car for 2 years. This car is beautiful.
1961 Dan Gurney 409 Impala
in Automobiles and Parts - Buy/Sell
Posted
Dad also prepped cars for the strip and mag shoots and articles. He would also bring home parts from the back door for cars in the neighborhood. There were some strong running cars around.