ddesanti

Members
  • Content Count

    5
  • Joined

  • Last visited

Community Reputation

10 Good

About ddesanti

  • Rank
    Junior Member
  • Birthday 08/02/1950
  1. Thanks for the reply. Before it started working again I was going to get the CRT fixed/replaced. This will push that to the top of the list..
  2. Greetings, I am new to this forum, and have searched thru as many posts as possible, but cannot find this problem, hoping I can get some help. I have a 1988 Reatta. The CRT intermittently lights up and then works fine. I just was driving it today, it was working. Parked the car and when I started it again, the screen does not light up. When I push the "hard" buttons, I get 2 beeps. I can push the soft buttons and things work, but just does not light up. This has done this a couple of times now... CRT does not light,,, then all of a sudden it works. This time was working for 8 days and now is not. Can you tell me what the 2 beeps mean? Normally I get a single beep when pushing the hard or soft buttons, but now, I get 2 beeps with the hard buttons and no beeps with the soft buttons. thanks. Update to this issue. I disconnected the ground from the battery, then removed the CRT and checked the plug for any problems. Reseated the plug a couple of times and reconnected the plugs on the back of the CRT. Connected the ground and started the car. The screen still does not light up, but now I have a See Diagnostic message on the main panel and when I touch any hard button, it automatically lights the Status button, I assume so I can go into the diagnostics, but with no screen, I cannot do anything. The See Diagnostic message does not go away after running the car for a bit either. How does this get reset? By going into the diagnostic screens? Can anyone send a picture of the various diagnostic screens so I can see about removing the message? Thanks.
  3. Greetings, I am new to this forum, and have searched thru as many posts as possible, but cannot find this problem, hoping I can get some help. I have a 1988 Reatta. The CRT intermittently lights up and then works fine. I just was driving it today, it was working. Parked the car and when I started it again, the screen does not light up. When I push the "hard" buttons, I get 2 beeps. I can push the soft buttons and things work, but just does not light up. This has done this a couple of times now... CRT does not light,,, then all of a sudden it works. This time was working for 8 days and now is not. Can you tell me what the 2 beeps mean? Normally I get a single beep when pushing the hard or soft buttons, but now, I get 2 beeps with the hard buttons and no beeps with the soft buttons. thanks. Update to this issue. I disconnected the ground from the battery, then removed the CRT and checked the plug for any problems. Reseated the plug a couple of times and reconnected the plugs on the back of the CRT. Connected the ground and started the car. The screen still does not light up, but now I have a See Diagnostic message on the main panel and when I touch any hard button, it automatically lights the Status button, I assume so I can go into the diagnostics, but with no screen, I cannot do anything. The See Diagnostic message does not go away after running the car for a bit either. How does this get reset? By going into the diagnostic screens? Can anyone send a picture of the various diagnostic screens so I can see about removing the message? Thanks.
  4. Hey,, thanks. Tried that one ($40) looks gray but the seller says its black.
  5. Greetings, looking for a console lid for an 88 Reatta, gray in color. Hinge not required, but plastic mounting plate must not be broken if possible. thanks, Dave