Jump to content

Beemon

Members
  • Posts

    2,818
  • Joined

  • Last visited

  • Days Won

    26

Posts posted by Beemon

  1. So you guys remember when I started talking about vibration issues when driving the car? Well I think I figured it out, sort of.

     

    Image may contain: outdoor

     

    I'm not sure when this happened. Its kind of the wrong time of the year to do stuff with cars, but looks like I'll have a weekend project of aligning the front end myself. At least to within reason. It'll be difficult with tires like these, so I'll rotate them first, then align it. Hopefully with my second or third paycheck I can invest in some nice white walls, and then align it again.

     

    My car still rides on original suspension equipment, but I've watched the car move through full travel and there doesn't seem to be any type of play in any of the bushings. When I first got the car, the grease was still soft where it was thin, but solid where it wasn't. I cleaned the living daylights out of all that stuff and it pushes fresh grease without issue. The only thing I threw out of whack was the tie-rod adjustment. If I remember correctly, reading one of @old-tank's posts, he used an app on his phone to use the built in gyroscope for measuring angles.

     

    Image may contain: car, tree and outdoor

     

    Since I'm back home, here's a vanity picture of the fleet in good ol' Wetstern Washington.

    • Like 9
  2. On 12/10/2019 at 4:15 PM, Ben Bruce aka First Born said:

    That is the spirit. Show that rascal, and the world, who is the boss.

     

    I was just told you made your breaks self adjusting. Did you document the details here?

     

     Ben

     

    Hi Ben,

     

    I think I posted about it in Post War, but I don't blame you if nothing came up in the search bar. I can never find what I'm looking for with it.

     

    The donor vehicle was a 1968 Buick Riviera, but any 12 inch drum brake Buick past I believe 1964 will work. Unfortunately they do not sell the adjuster arm new, so you need to find a good used pair at the junkyard. I found two cars and put them on the front and rears, but I had trouble finding a local shop that did custom brake lining so I went to a disc kit on the front (one I had purchased before). I still have them on the rears and they work perfect. 

     

    Image may contain: 1 person

     

    Here is the set installed on the front. All of the springs and associated hardware was bought NEW from NAPA. I don't remember part numbers, but you can find them on RockAuto or the NAPA catalogs. You might have to search different years or models on both sites. I used to have an excel sheet, but I think I lost it when I lost my backup thumb drive (irony).

     

    No photo description available.

     

    This is the replacement override spring on the left with the originals on the right. I don't know when they changed the design but they are and work the same as the originals. 

     

    Hope this helps!

    • Thanks 1
  3. I've been working this degree since 2010, the same year I started my Buick and the same year I graduated after the death of my grandmother. It's been a long road, getting sucked into the politics of community college, but I wouldn't give it up. 

     

    I started my Buick project to save my grandfather from grief but it ultimately helped both of us get through life in our own ways. Im glad that despite all the shortcomings, he at least got to see the car painted again before he passed. 

     

    I don't plan to go anywhere. Sometimes out of spite I threaten to sell the car, but I could never part with it because it has become not only a part of me and a part of who I am, but also the revival of my grandfather's spirit and I couldn't give that away.

    • Like 5
    • Thanks 1
  4. The distributor vacuum advance line is 1/8" copper tubing (just like the stuff you get in the oil pressure line replacement kits at the auto parts store). I forget the name of the compression fitting that goes into the carb and vacuum advance, but you can buy them at NAPA, Weatherhead P/N 6100x2 for 1/8". They look like this:

    post-75106-143139330935_thumb.jpg

     

    You could splice it with 1/8" ID vacuum tubing if you want.

    • Thanks 1
  5. You can also buy a standard Edelbrock/Carter AFB electric choke, flip the spring and install it like the heat pipe choke. I think there is even a listing on ebay that has this swap already done and should be a bolt on retrofit. 

     

    The hot air choke will only work properly if the butterfly and counterweight are free to spin on the exhaust manifold, and the thermostatic spring that tensions it is in good working order. If this piece is stuck in the open position or it is missing the spring, then it will not allow proper heat circulation between the intake and exhaust manifolds to properly operate the choke. How fast it opens also depends on your ambient weather local to you (people in Texas will have an easier time than people in Wisconsin). I have tried several times to get mine to work and I have never got it to open and close properly, even with replacing the old choke spring with a new one. I live in Washington state and used to drive my car in 10*F weather conditions. The electric choke has never left me stranded, but the old heat pipe has (in terms of having to pop the hood and manually hold it open/closed).

     

    In my latest configuration, I bought a pre-formed brake line roughly the same size as my old hot air choke tube, cut the end off one side and affixed the proper fitting for the choke housing. I then crimped and sealed the end of the tube with a vacuum cap that dangles back behind the engine. It is retained with a cheap metal tube holder off of the back of the block in one of the empty head bolts and it looks stock, you cannot tell its a fake unless you sit on top of the air cleaner.

    • Like 1
  6. 2 hours ago, avgwarhawk said:

     

    This does not compute. Water will need to slow so it can pick up the heat and carry it off as I understand it.

     

    Without getting too much into heat transfer stuff, there is some degree of dwell time but from every lab test I've conducted on campus with cross-flow heat exchangers, faster flow of coolant through the hot stuff always equals better heat transfer. Think of it like this. The coolant contacts the surface of the hot stuff only on the outside of the flow volume. The more turbulent the flow, the more it "mixes" the flow so it constantly takes the fluid in contact with the outside and swaps places with the inside colder stream, until it reaches a saturation temperature if given enough time to dwell.

    • Like 6
    • Thanks 1
  7. To keep the axle from rotating you would weld the U- bolt cup to the axle at the natural angle the trailing arms attach to the axle.

     

    When doing suspension work, you need to make sure you do everything under full weight of the car, which can be difficult if your axle is disconnected. Otherwise, you can potentially throw out all of your important arc angles. Take measurements of where the axle sits before the mod and then when everything is disconnected, try sand put the axle back in the correct place with the correct pinion angle. 

  8. After finally getting my 56 Titled and Registered (again) and insuring it, I was finally able to enjoy the highest quality automobile I've ever had the pleasure of operating. It had been some months, I forgot how solid the doors sounded when they came shut on the fresh weatherstripping. Or the very brisk startup with the touch of the gas pedal, or the seamless acceleration from a stop with no hard shifting. Unfortunately I'll be limiting myself to 3000 miles a year. Fortunately with my yearly daily driving, I've never exceeded 2500 miles. Can't wait to be back in the challenge next year.

    • Like 5
  9. I have had the same experience as Lancemb. The first time I replaced the rag joint, I put it back in no issue. I then tried a steering box conversion and accidentally broke it, and when I buttoned everything up there was no difference whatsoever. Probably does as much good as those weird anti-static springs behind the dust caps on your front hubs.

    • Thanks 1
  10. On 11/30/2019 at 3:43 PM, NC-car-guy said:

    Stupid auto correct. Flow kooler.

     

    Some people say Flowkooler is a gimmick, but the design is supposed to be high flow, minimal cavitation. If the school labs translate to cooling in a cylinder head, the best cooling is achieved when the flow is most turbulent, AKA going faster. You'll have to let us know how it performs, as I am wanting to do the same thing.

  11. Good to know!

    I had glued it before and it worked flawlessly until it encounter the Incredible Hulk at this restoration shop. It is holding now, so I am not too concerned with it. I also fine tuned my antenna to grab when going up and down but also slip when bottomed out. I don't know if your model antennas have a tensioning screw on the side of the motor, but mine does and its a very quick procedure on the bench. 

     

    I had a very eventful break.  I got to go to my junkyard of choice and made off with some clean hood bolts, some misc sheet metal screws and a rusty, correct starter relay for about $40. The starter relay was my favorite find because I had to go from car to car looking for one that would let all four screws unscrew. The inside was sealed perfectly from the PNW weathering and all I had to do was clean the arms to bare metal. Some day I'll paint the cover and make it look nice, but I eliminated that chonky high beam relay and now everything is wired comfortably. All I need now is an original horn relay. I ran out of time because I brought my wife and we had to leave due to family issues on her side. I also re-attached the hood ground strap, since my original clip on ground thing broke a long time ago. it seems to do a better job at shielding RFI with the strap than without, as expected. 

     

    My hood adjustment bumpers cannot be adjusted properly because one of the clips was installed upside down, so I cannot screw it out any further. To fix, I will need to disassemble the entire front end because its stuck behind the grill. Which is of course, fine, because if you see in the second to last picture, they forgot some things. HMMM. Better to be safe than sorry, I guess my next task will be to replace every single incorrect fastener (like the standard head bolts on the exterior lock washers instead of the flange head bolts) and washer with correct, or suitable replacements. Part of me grabbing those old rusty sheet metal screws is to find a replacement the right size at the hardware store. Unfortunately they will all be flange head sheet metal screws since you can't buy standard sheet metal screws for cheap, at least not at my hardware store.

     

    Lastly, one other thing I made off with at the junkyard... stainless Anco wipers! I found a nice set of Trico wiper blades in stainless, too, but as far as I know you can only buy the reproduction Anco wipers over the counter. Maybe you can get Trico inserts off the web? If so, I will go back for them but man what a difference! Over the counter they are plain. I think the Stainless wipers really complete the windshield area of the car.

     

    And thus.. back to school for two more weeks. I passed my Fundamentals license exam, so now all I need to do is graduate and I'm on my way to becoming someone who thinks they know more about machining than a machinist. 

    20191130_150939.jpg

    20191130_150946.jpg

    20191130_150959.jpg

    20191130_151050.jpg

    20191130_151058.jpg

    20191130_151143.jpg

    20191130_151154.jpg

    20191130_151256.jpg

    20191130_151337.jpg

    • Like 8
  12. Image may contain: sky and outdoor

     

    Spent yesterday with my Dad for his Thanksgiving dinner. We went sand shrimp foraging on the beaches of Ocean Shores. Didn't find anything, but driving on the beach was pretty fun. 

     

    Image may contain: tree, outdoor and nature

     

    Today we went to give thanks to the grandparents. Its the first time I've gotten the car out after getting re-registered and new insurance. I noticed today the grill medallion reads 1956 Buick Special. Among the things that were thrown away includes the original 1956 Buick Century medallion, so I'll need to track another one of those down to make the car correct. This Saturday I will be going to the junkyard to see if I can track some of this stuff down, but given how rare Centuries are, I doubt I will find a medallion locally. I'll be making a post in Buy/Sell, hopefully someone has some Century parts out there.

     

    I'm trying to remain positive but everytime I find something, it just ruins the mood.

     

    Happy Thanksgiving all.

    • Like 2
    • Thanks 1
  13. 2 hours ago, old-tank said:

    Not unique to the hobby, just life in general....

     

    There is bad everywhere, but this hobby is something else. The only crooks i've come across have been in the classic car hobby. I feel like this hobby attracts a lot of people with skills looking to take advantage of others. I mean just cars in general. Those stereotypes of mechanics taking advantage of people are just multiplied in the classic car hobby. 

×
×
  • Create New...